Here I am again,
Erik, you where right, I mean that , if the printer is attached before
the virtual machine boots,
I have the possibility to enable the printer in the menu-item "virtual
macines" and then usb.
But, when I do this, a setup in windows is starting and after a very
short time, the system crashes and the virtual machine is powered off
itself in a abnormal way.
I have found the most recent logfile ans I see only a litle differens
between this printer and my lexmark normal printer:
part of logfile:
Jan 09 23:47:14.968: vmx| USB: Found device [name:Lexmark\ 510\ Series
vid:043d pid:009f path:13/15/1/3 speed:full family:printer]
Jan 09 23:47:14.968: vmx| USB: Found device [name:Apple\ IR\ Receiver
vid:05ac pid:8242 path:13/5/1 speed:low family:hid]
Jan 09 23:47:14.968: vmx| USB: Found device [name:Printer vid:beef pid:
0003 path:13/15/1/4 speed:full family:printer]
end of logfile
what is the meaning of beef?
is this perhaps important information to solve this problem?
thanx in advance!
best regards,
William
Op 9-jan-09, om 16:22 heeft william windels het volgende geschreven:
hmm, I can look for it further but the effective problem is that you
can not connect the printer without crashing.
So, you can also not press the button while the printer isn't still
connected.
best regards,
William
Op 9-jan-09, om 13:49 heeft erik burggraaf het volgende geschreven:
Heh man, this may sound stupid, but did you look for a button in
the vmware window that says connaisseurect index everest and press
it? Sometimes my hardware gets passed straight through to the vm,
and other times I have to kick start it that way.
Best,
erik burggraaf
Certified Technician
Assistive Computing LTD Support and training
Sales department: 888-828-2445
Support and Training: 888-255-5194
Email: [email protected]
Website coming soon
On 9-Jan-09, at 3:03 AM, william windels wrote:
Hello all,
I would like to install my everest brailleprinter on my mac.
Since I didn't find out how it was working on mac itself, I tryed
it under vmware fusion (windows xp pro).
I used winbraille 3.14
The problem is that windows and vmware don't give reaction anymore
when I plug in the printer into the mac after installing
winbraille and the driver succesfully.
It's the last driver available at the moment.
With the same cable and the same software, the everest works fine
on a windows pc.
We can't find any logfile in windows about that and also, my
lexmark printer works fine under mware.
Some experiences or suggestions are very welcome!
thanx alot,
best regards,
William Windels
