On Thu, Jan 27, 2011 at 11:43 AM, Ramana Reddy <[email protected]> wrote: > Hello Everyone, > > I want to send the vlan traffic between VMs located on two host machines( > the diagram has been attached > with the mail) . Both Host machines are XenServers (5.6) with Debian as > DomUs. > > VM1 and br0 setup on host1: > > The VM1 setup: > > #vconfig add eth0 10 > #ifconfig eth0.10 10.0.0.1 netmask 255.255.255.0 > > eth0 is having IP address 192.168.0.x. > > The br0 setup on host1: > #ovs-vsctl add-br br0 > #ovs-vsctl add-port br0 eth0 > #ovs-vsctl add-port br0 vif1.0 tag=10
You shouldn't configure the interface as an access port and generate tagged packets in the VM. It's one or the other but not both. This is the same problem as you were having in the other thread. _______________________________________________ discuss mailing list [email protected] http://openvswitch.org/mailman/listinfo/discuss_openvswitch.org
