On Sun, Jan 30, 2011 at 3:26 PM, Jesse Gross <[email protected]> wrote: > On Thu, Jan 27, 2011 at 11:43 AM, Ramana Reddy <[email protected]> wrote: >> Hello Everyone, >> >> I want to send the vlan traffic between VMs located on two host machines( >> the diagram has been attached >> with the mail) . Both Host machines are XenServers (5.6) with Debian as >> DomUs. >> >> VM1 and br0 setup on host1: >> >> The VM1 setup: >> >> #vconfig add eth0 10 >> #ifconfig eth0.10 10.0.0.1 netmask 255.255.255.0 >> >> eth0 is having IP address 192.168.0.x. >> >> The br0 setup on host1: >> #ovs-vsctl add-br br0 >> #ovs-vsctl add-port br0 eth0 >> #ovs-vsctl add-port br0 vif1.0 tag=10 > > You shouldn't configure the interface as an access port and generate > tagged packets in the VM. It's one or the other but not both. This > is the same problem as you were having in the other thread.
I just noticed in the title that you are trying to create a service vlan. Open vSwitch does not support double tagging, which is the reason for the restrictions that I mentioned. _______________________________________________ discuss mailing list [email protected] http://openvswitch.org/mailman/listinfo/discuss_openvswitch.org
