Jesse, Your probing made me investigate a bit more the connectivity between the machines.It finally worked as I found that I had the same problem as the user in this thread: http://openvswitch.org/pipermail/discuss/2011-March/004961.html
I will update my configuration to avoid this behavior. Thanks for your responses. JC On Nov 2, 2011, at 3:59 PM, Jesse Gross wrote: > On Wed, Nov 2, 2011 at 3:47 PM, JC Martin <[email protected]> wrote: >> When it doesn't work I have a host unreachable while trying to ping a device >> on the 192.168.200.x. I see that the icmp packets are routed to the right >> interface (the one attached to the bridge with the tunnel, with the >> IP=192.168.200.4), but it seems that the tunnel is too long to see its end: > > Yes, but what does it look like on the wire? > > Are your tunnel endpoints symmetric between xcp-2 and bm-1 and have IP > connectivity on those addresses? _______________________________________________ discuss mailing list [email protected] http://openvswitch.org/mailman/listinfo/discuss
