On Mon, Apr 8, 2013 at 4:59 AM, Prashant Chougule <[email protected]> wrote: > in my ovs setup i have bridge br0 and port eth0 under it > m1 ip:192.168.1.15 > m2 ip:192.168.1.9 > > > I have delete the default flow as below using ovs-ofctl del-flows br0 > NXST_FLOW reply (xid=0x4): > cookie=0x0, duration=12.006s, table=0, n_packets=95, n_bytes=11126, > idle_age=0, priority=0 actions=NORMAL > after deleting i am trying to ping m2 to m1 not possible i understand > i added flow > sudo ./ovs-ofctl add-flow br0 > priority=0,idle_age=0,nw_src=192.168.1.9,nw_dst=192.168.1.15,actions=NORMAL > it will start the ping > > but if i change action field with some value like actions=output:1 it stop > the ping , why ? > if i added flow with the dl_dst and dl_src it will again block, why ? > > i am not able to get packet match as per added flow in the table. how m i > suppose to add flow so that it will take mac as well as action field after > deleting default flow..? > > i.e after deleting default flow and added new flow like > > sudo ./ovs-ofctl add-flow br0 > priority=0,idle_age=0,nw_src=192.168.1.9,nw_dst=192.168.1.15,dl_dst=c2:b8:ec:e1:2e:46,dl_src=e8:40:f2:3c:ad:93,actions=output:1 > > i am not able to ping m2 - m1 why ? help me with this.
Presumably you need to add flows that handle traffic in both directions. You should look at the flow table after inserting flows and running traffic to confirm that the flows you added match what you expect and are being hit. _______________________________________________ discuss mailing list [email protected] http://openvswitch.org/mailman/listinfo/discuss
