On Mon, Apr 8, 2013 at 9:15 PM, Prashant Chougule <[email protected]> wrote: > that means i have add all the fields in the flow to match..?
No, I said that you need to have flows for both directions of traffic for the fields that you are matching on. > and why is necessary to add a flow to table 0 if i added flow to other table > it will not show me the packets in that table after dump-table. > or if i added default flow to table other than 0 why it is not showing > matching and lookup in that table..? Processing starts at table 0 and you need to resubmit to get to other tables. > On Mon, Apr 8, 2013 at 9:36 PM, Jesse Gross <[email protected]> wrote: >> >> On Mon, Apr 8, 2013 at 4:59 AM, Prashant Chougule >> <[email protected]> wrote: >> > in my ovs setup i have bridge br0 and port eth0 under it >> > m1 ip:192.168.1.15 >> > m2 ip:192.168.1.9 >> > >> > >> > I have delete the default flow as below using ovs-ofctl del-flows br0 >> > NXST_FLOW reply (xid=0x4): >> > cookie=0x0, duration=12.006s, table=0, n_packets=95, n_bytes=11126, >> > idle_age=0, priority=0 actions=NORMAL >> > after deleting i am trying to ping m2 to m1 not possible i understand >> > i added flow >> > sudo ./ovs-ofctl add-flow br0 >> > >> > priority=0,idle_age=0,nw_src=192.168.1.9,nw_dst=192.168.1.15,actions=NORMAL >> > it will start the ping >> > >> > but if i change action field with some value like actions=output:1 it >> > stop >> > the ping , why ? >> > if i added flow with the dl_dst and dl_src it will again block, why ? >> > >> > i am not able to get packet match as per added flow in the table. how m >> > i >> > suppose to add flow so that it will take mac as well as action field >> > after >> > deleting default flow..? >> > >> > i.e after deleting default flow and added new flow like >> > >> > sudo ./ovs-ofctl add-flow br0 >> > >> > priority=0,idle_age=0,nw_src=192.168.1.9,nw_dst=192.168.1.15,dl_dst=c2:b8:ec:e1:2e:46,dl_src=e8:40:f2:3c:ad:93,actions=output:1 >> > >> > i am not able to ping m2 - m1 why ? help me with this. >> >> Presumably you need to add flows that handle traffic in both >> directions. You should look at the flow table after inserting flows >> and running traffic to confirm that the flows you added match what you >> expect and are being hit. > > > > > -- > Thanks &Regards, > Prashant Chougule. _______________________________________________ discuss mailing list [email protected] http://openvswitch.org/mailman/listinfo/discuss
