Actually i don't know detailly I check my system, it was set to TYPE=Vlan. I just guess that the reason was wrong ifcfg-setting. Before: [ifcfg-eth0.10]DEVICE=eth0.10TYPE=EthernetVLAN=yesVLAN_ID=10PHYSDEV=eth0 After [ifcfg-eth0.10] DEVICE=eth0.10 TYPE=Ethernet VLAN=yes BOOTPROTO=none -----Original Message----- From: "jimson jimson"<[email protected]> To: "이지찬"<[email protected]>; Cc: Sent: 2015-10-18 (일) 23:43:29 Subject: RE: [ovs-discuss] Problem that the MAC address is changed. Can you explain ? Eager to knowFrom: 이지찬 Sent: 18- 10- 2015 07:41 PM To: [email protected] Subject: Re: [ovs-discuss] Problem that the MAC address is changed. 11:11:11:11:11:11 MAC Address is just an example. I solved this problem! The real problem was the wrong set of ifcfg.... Thank you for your interest. -----Original Message----- From: "jimson jimson"<[email protected]> To: "이지찬"<[email protected]>; Cc: Sent: 2015-10-18 (일) 23:05:42 Subject: RE: [ovs-discuss] Problem that the MAC address is changed. Can you try using another mac address instead of using 11:11:11:11:11:11, say 10:11:11:11:11:11? This will make the mac address a unicast address. From: 이지찬 Sent: 18- 10- 2015 05:56 AM To: [email protected] Subject: Re: [ovs-discuss] Problem that the MAC address is changed. No, it is not multicast packet... Any packet the macaddress is changed...
Addition... my setting is so simple. [PC1] br1 ----- eth0.10 (To PC2) And... system network... ifcfg-br1 DEVICETYPE=ovs DEVICE=br1 TYPE=OVSBridge IPADDR=10.205.128.1 ...... ifcfg-eth0.10-ovs DEVICETYPE=ovs DEVICE=eth0.10 TYPE=OVSPort OVS_Bridge=br1 ifcfg-eth0.10 DEVICE=eth0.10 TYPE=Ethernet VLAN=yes VLAN_ID=10 PHYSDEV=eth0 -----Original Message----- From: "jimson jimson"<[email protected]> To: "이지찬"<[email protected]>; Cc: Sent: 2015-10-17 (토) 21:07:14 Subject: RE: [ovs-discuss] Problem that the MAC address is changed. Is it related to multicast address? From: 이지찬 Sent: 17- 10- 2015 04:29 PM To: [email protected] Subject: [ovs-discuss] Problem that the MAC address is changed. ARP : PC2 [ARP Request] -> PC1 [ARP Reply] PC2's Image. No problem in PC2. PC1's Image But, Cause problem in PC1. Strangely change MAC Address in Received packet. At 11:11:22:22:22:22, 11:11 is original source mac address(11:11:11:11:11:11)'s end 16bits. 22:22:22:22 is original destination mac address(22:22:22:22:22:22)'s begin 16bits. I had never seen these problems... How can I solve this problem?
_______________________________________________ discuss mailing list [email protected] http://openvswitch.org/mailman/listinfo/discuss
