I going to assume, yes. But in case CMMF advises otherwise, will let you know. I will know earliest by 9am or there abouts.
-G On Fri, Mar 28, 2014 at 8:50 PM, Torrie Fischer <[email protected]>wrote: > On Wednesday, March 26, 2014 17:50:12 gs volt wrote: > > I just announced Syn/Hak at Cleveland Mini Maker Faire 2014 on meetup: > > > > http://www.meetup.com/synhak/events/173605542/ > > > > *Event details (for convenience):* > > > > Cleveland Mini-Maker Faire 2014 will be held at the Cleveland Public > > Library (both old and new buildings) between 10a-5p on 3/29/2014 and will > > feature 100+ exhibitors that like to share knowledge and teach attendees > > how to make cool things, age no bar! > > > > More event information on their website here: > > http://www.makerfairecleveland.com > > > > Come celebrate making with SYN/HAK at the 2014 Cleveland Mini-Maker > Faire! > > > > Find us in the lower level (outside the auditorium) of Louis Stokes Wing > > aka the new building > > > > At this year's event, we plan to: > > - Provide an area for people of all ages to build simple circuits on the > > fly using a SnapCircuits kit (first come first served) > > - Showcase Arduino Mega controlled relays to synchronize your 110V > devices > > - Showcase how to easily use painters tape and a battery to illuminate > LEDs > > that remain lit for months > > - Showcase simple off the shelf solar panels to illuminate more LEDs and > > power Arduinos > > - Showcase RaspberryPi > > - Showcase TinyLily and Tinyduino by TinyCircuits in Akron > > - Showcase an illuminated lab-coat (worn by G) > > - Showcase how to solder circuits (time and materials permitting) > > - Share information about Syn/Hak so that attendees can learn about our > > recent relocation in Akron downtown. > > > > I guess you could say we're excited to be illuminating LEDs all day at > the > > Cleveland Mini-Maker Faire 2014, so come on out and have fun illuminating > > LEDs with us! > > > > Torrie, I got a response from CMMF that yes, soldering is indeed allowed > at > > the library. They are encouraging lots of it this year. > > > > I think I have a good spread of things to display on an 8foot table. I > > might even go vertical with some of the permanent interactive displays. > > Also, I plan to stand in front of the table this year, rather than > behind. > > > > *Following things are forthcoming for this event *(they're in the mail, > if > > I get it I'll update the meetup event): > > - LED strip that I hope to mount on the 8foot table's edges to illuminate > > the whole table > > - 50-100 LEDs and 3V batteries - for the youngest attendees for them to > > take with them > > > > *Questions I have pending:* > > - Do we have a Synhak sign that I can take with me (battered is fine)? > > - CMMF just announced that there is one parking permit per exhibitor that > > they can cover. I'm going so I plan to use the permit they give me for my > > car. Anyone want to come along, simply reply back and we can rendezvous > at > > Synhak around 8a. I plan to have an early day, might event stop at > Syn/Hak > > earlier than 8a on 3/29 for last minute planning/testing. Unlike last > year, > > I plan to move towards Cleveland by 8:30a at the latest. My trunk will > > pretty much fit everything I plan to carry. > > - I want to plan to blog the event. But if I'm solo, I can't video tape > > makers in attendance and their projects for obvious reasons. If you go > with > > me, it'll allow me to "guerrilla video" makers - I don't know if CMMF > has a > > dedicated resource for this. > > > > As I have more questions, I plan to reply to this thread. Please reply > back > > with your thoughts, additional demos that you might wish to share with > > attendees. > > > > Thanks in advance to all the hackers at synhak and makersalliance for > > helping me with this. > > > > Regards, > > Ya know, screw it, I'm getting out of this funk. I'm going to work on the > mobile hackerspace idea a little bit more and pack up what we've got for > soldering. We should still have a lot of kits. > > G, are we permitted to accept donations? >
_______________________________________________ Discuss mailing list [email protected] https://synhak.org/mailman/listinfo/discuss
