Hi, We've just finished the run as title, you can check: http://en.qi-hardware.com/wiki/Milkymist_One_RC2_Test_Plan#Report_of_Milkymist_One_RC2_Board
The overall of this RC2 run, please check: http://en.qi-hardware.com/wiki/Milkymist_One_run_2_schedule The issues discovered during production also recorded: http://en.qi-hardware.com/wiki/Milkymist_One_RC2_Known_Issues The majority of err about cannot boot, we've still not fully understood yet. I made two mistakes on BoM value which let VGA DDC failed and R30/R39 swapped. You can check it out. Now for all of those batches I fixed back. The Y2 Xtal for video chip I just requested samples from the same type of Y1, later I'll test this. Most of this run we have productive items needed to improve: 1, checking incoming parts' mark/pins 2, good results of AOI and visual inspection 3, well-defined on audio test environment built 4, use a Y Pb Pr component video in signals rather than one composite PAL video in 5, fast flashing I just roughly mentioned them above, if you think it's not enough, just replenish. Thanks, Adam
_______________________________________________ Qi Hardware Discussion List Mail to list (members only): [email protected] Subscribe or Unsubscribe: http://lists.en.qi-hardware.com/mailman/listinfo/discussion
