I have mentioned 4 the first time I saw the first schematics when wolfgang visits me... :)
2010/12/15 Adam Wang <[email protected]>: > Hi, > > We've just finished the run as title, you can check: > http://en.qi-hardware.com/wiki/Milkymist_One_RC2_Test_Plan#Report_of_Milkymist_One_RC2_Board > > The overall of this RC2 run, please check: > http://en.qi-hardware.com/wiki/Milkymist_One_run_2_schedule > > The issues discovered during production also recorded: > http://en.qi-hardware.com/wiki/Milkymist_One_RC2_Known_Issues > > The majority of err about cannot boot, we've still not fully understood yet. > I made two mistakes on BoM value which let VGA DDC failed and R30/R39 > swapped. You can check it out. Now for all of those batches I fixed back. > The Y2 Xtal for video chip I just requested samples from the same type of > Y1, later I'll test this. > > Most of this run we have productive items needed to improve: > 1, checking incoming parts' mark/pins > 2, good results of AOI and visual inspection > 3, well-defined on audio test environment built > 4, use a Y Pb Pr component video in signals rather than one composite PAL > video in > 5, fast flashing > > I just roughly mentioned them above, if you think it's not enough, just > replenish. > Thanks, > Adam > > > _______________________________________________ > Qi Hardware Discussion List > Mail to list (members only): [email protected] > Subscribe or Unsubscribe: > http://lists.en.qi-hardware.com/mailman/listinfo/discussion > -- David Reyes Samblas Martinez http://www.tuxbrain.com Open ultraportable & embedded solutions Ben NanoNote, Arduino, Openmoko Hey, watch out!!! There's a linux in your pocket!!! _______________________________________________ Qi Hardware Discussion List Mail to list (members only): [email protected] Subscribe or Unsubscribe: http://lists.en.qi-hardware.com/mailman/listinfo/discussion
