2011/3/31 David Reyes Samblas Martinez <[email protected]>: > 2011/3/31 Werner Almesberger <[email protected]>: >> David Reyes Samblas Martinez wrote: >>> I have an idea to enhance your atusb-prg, improving the atusb end with >>> a clamp , to not need to maintain my hand occupied holding the cable. >> >> Yeah, that should be easy. When preparing the shipments I considered >> making a piece of wood that would act as protective casing but also >> as a simple fixture, but eventually decided against it because it >> would have meant even more delays. >> >>> this should be enough , also I want to separate process, flashing from >>> testing, to do one process at time. for the first ~100 units batch, >> >> Why ? For testing you need to connect to USB anyway. You may as well >> do the DFU first. When done, it will jump into the application, so >> you don't even need to unplug. >> >>> Also if all flashing is done in one step , and the demand requires >>> more prodution ratios, >> [...] >> >> Your bottleneck may be testing. Unless you're prepared to set up >> properly shielded RF test chambers, you'll be limited by >> interference between devices. In practical terms, this means that >> you can probably only test one device at a time. >> >> Testing will take a few seconds, so you wouldn't gain much by >> having massively parallel flashing. >> >>> So please let me insist in showme the way to flash bootloader and >>> program at once even with actual avr-dude (also usefull for me to be >>> able to flash arduino sketches with arduino bootloader ) and make me >>> happy ... please[1] >> >> Heh, I did something like this once at Openmoko, for the HXD8 >> project. I think I did address assignment by making the devices >> show up by their default address, then bring up one interface >> after the other, SSH into the device, and change its address to >> a unique value. Then proceed a usual. > I mean to flash the avr chip with bootloader and program at once , not > the Nanonote :P gotcha!!! http://arduino.cc/forum/index.php/topic,55245.0.html >> >> - Werner >> >> _______________________________________________ >> Qi Hardware Discussion List >> Mail to list (members only): [email protected] >> Subscribe or Unsubscribe: >> http://lists.en.qi-hardware.com/mailman/listinfo/discussion >> > > > > -- > David Reyes Samblas Martinez > http://www.tuxbrain.com > Open ultraportable & embedded solutions > Ben NanoNote, Arduino, Openmoko > Hey, watch out!!! There's a linux in your pocket!!! >
-- David Reyes Samblas Martinez http://www.tuxbrain.com Open ultraportable & embedded solutions Ben NanoNote, Arduino, Openmoko Hey, watch out!!! There's a linux in your pocket!!! _______________________________________________ Qi Hardware Discussion List Mail to list (members only): [email protected] Subscribe or Unsubscribe: http://lists.en.qi-hardware.com/mailman/listinfo/discussion
