Stefan Schmidt wrote: > Have you considered using the standard DFU method to signal a firmware > upgrade during normal operation?
Finally implemented it. Works like a charm :-) I also increased the boot loader delay from 2.0 s to 2.5 s to avoid racing with dfu-util. So there are now three approaches for updating the application: - the old way (make update): atrf-reset -a # wait until the device enumerates or about 1 s dfu-util ... - the proper way (make dfu): dfu-util ... - the brick way: # unplug and re-connect the atusb dongle # wait, as above dfu-util ... Boot loader and application still share the same PID. We can change the application's PID with a firmware update in the field, should the need arise. - Werner _______________________________________________ Qi Hardware Discussion List Mail to list (members only): [email protected] Subscribe or Unsubscribe: http://lists.en.qi-hardware.com/mailman/listinfo/discussion
