Politely, I suggest you add more ram and do without swap. You could
use the 128 Mb probably fine, if you have 256 Mb real ram. Or use the 512
Mb if its spare and that will give you room for growth.
Swap
on CF is going to be real slow too...
The CF
images are just for soekris and wrap boards (cos they lack any CDROM
support.)
-----Original Message-----Hi, I'm using a dual CF-to-ide that takes 2 CF cards and uses them as 2 different hard disks.
From: analyzerx [mailto:[EMAIL PROTECTED]
Sent: Monday, 25 July 2005 1:02 a.m.
To: [email protected]
Subject: [pfSense-discussion] CF cards and using different partition for swap!?
pfsense installation can see both but I can only use one for installation
Is there a way to use the one disk for the pfsense installation and one for the swap?
and one disk is 128MB and the other 512MB... is it wise to use the 512MB as swap?
ps. I don't use the CF images to install pfsense I use the liveCD if this makes any difference, cause I want to be able to update the firmaware! ^_^
