My config changes are not being synced to fw1 when I make them on fw0. Is there a log some where I can look at to see how/why this is failing?
Here are the 'Services: CARP Settings' on fw0 (primary firwall): Synchronize Interface: OPT4 Synchronize to IP: OPT4's interface ip Remote System Password: admin's password for both boxes the following are checked: Synchronize Enabled Synchronize rules Synchronize aliases Synchronize nat Synchronize Virtual IPs on fw1 (backup firewall): Synchronize Interface: OPT4 the following are checked: Synchronize Enabled ------------ Both firewalls have a rule on OPT4 prot:* src:OPT4 net src port:* dest:OPT4 net dest port* failover is working on all 5 (soon to be 10) CARP ips. It seems as though states are being synced as well but I wouldn't know how to verify that (my tcp connections don't drop when I turn off the MASTER). I have fw0 set with a skew of 0 and fw1 with a skew of 1. They failover just fine and when preemption is checked (i've not got it checked at the moment because people are actually using the internet connection now) it gives fw0 back MASTER on all the interfaces just like it should. Thoughts?
