Hi Scott, I use the OpenBrick-E, but it works on all of hardware, as well as the Lex systems.
I use the compact flash image built for the Wrap, but have to replace everything in the /boot/kernel with stuff from the LiveCD to make it works. What is the difference between the LiveCD and Wrap-based Embedded image? Thanks. Bao On Mon, September 12, 2005 12:51 pm, Scott Ullrich wrote: > Awesome. What hardware did you use? > > Scott > > > On 9/12/05, Bao C. Ha <[EMAIL PROTECTED]> wrote: >> Hello, >> >> I have been playing around with pfSense last weekend, trying >> to make it bootable on the compact flash on our hardware. I have >> built some images that could be "dding" directly to the compact >> flash. >> >> These images assume the CF to be on the secondary master IDE, >> /dev/ad2, which is the case for our hardware or Lex systems. I >> use grub for the boot loading since it is less "finicky" about >> the CF brands. They have worked great with the Kingston Elite >> Pro CF, but almost any other CF brand should work. >> >> They are at the following URL, >> >> 128MB CF image: >> http://shopping.hacom.net/catalog/pub/pfsense/128pfSense-0.84.img.gz >> >> 256MB CF image: >> http://shopping.hacom.net/catalog/pub/pfsense/256pfSense-0.84.img.gz >> >> 512MB CF image: >> http://shopping.hacom.net/catalog/pub/pfsense/512pfSense-0.84.img.gz >> >> 1GB CF image: >> http://shopping.hacom.net/catalog/pub/pfsense/1gbpfSense-0.84.img.gz >> >> To install, just dd them to the appropriate size CF as follows: >> gunzip -c 1gbpfSense-0.84.img.gz | dd of=/dev/sda bs=16k >> >> Let me know how they work! >> >> Bao >> -- >> Best Regards. >> Bao C. Ha >> Hacom OpenBrick Distributor USA http://www.hacom.net >> voice: (714) 530-8817 fax: (714) 530-8818 >> 8D66 6672 7A9B 6879 85CD 42E0 9F6C 7908 ED95 6B38 >> >> > -- Best Regards. Bao C. Ha Hacom OpenBrick Distributor USA http://www.hacom.net voice: (714) 530-8817 fax: (714) 530-8818 8D66 6672 7A9B 6879 85CD 42E0 9F6C 7908 ED95 6B38
