Looks great but they are out of stock :(
----- Original Message -----
From: "Bradley Van Peursem" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Tuesday, November 08, 2005 8:14 PM
Subject: RE: [pfSense-discussion] WRAP Power Supply
http://www.mini-box.com/s.nl/sc.8/category.19/it.A/id.383/.f
We have many of these in the field and like the overall design best of
any we have tried. Extra power to keep the units running cool, and the
outlet end is small enough that it doesn't take up 2-3 outlets on a
power strip.
Hope that helps.
-----Original Message-----
From: Bill Marquette [mailto:[EMAIL PROTECTED]
Sent: Tuesday, November 08, 2005 5:44 PM
To: [email protected]
Subject: Re: [pfSense-discussion] WRAP Power Supply
I would note that the Soekris supplies really suck. I've seen them
supply undervoltage causing most unique problems. I'd personally buy a
better supply with a higher amp rating and make sure it's pumping out
the right voltage when you get it, if it's not send it back (it wouldn't
hurt to pick up a supply that pumps out 1V more than the stock supply
either).
--Bill
On 11/8/05, Scott Ullrich <[EMAIL PROTECTED]> wrote:
Search here:
http://www.digikey.com/
This is where Soekris gets theirs from...
Scott
On 11/8/05, Mojo Jojo <[EMAIL PROTECTED]> wrote:
>
> Thanks for the info.. Anyone else have suggestions?
>
> I am not sure what I would pay for one of these new, could be
pricey.
>
> I can probably find one on eBay but if I need new ones they may be
> out of my price range.
>
> --Todd
>
>
>
>
> ----- Original Message -----
> From: Bill Plein
> To: [email protected]
> Sent: Tuesday, November 08, 2005 12:48 PM
> Subject: Re: [pfSense-discussion] WRAP Power Supply
>
>
> On 11/8/05, Mojo Jojo <[EMAIL PROTECTED]> wrote:
> > I ordered my enclosures through wisp-router and my boards, CF and
> > power supply through SiliconKit.
> >
> > I am happy with all except the power supply which was horrible.
> >
> > The power supply powers the unit but barely stays plugged into the
> > WRAP, very loose and flimsy.
> >
> > Can someone recommend a place to purchase a power supply that
> > actually
> stays
> > plugged into the WRAP.
> >
> > Looking for a US supplier and a link would be great.
>
>
> I don't have a link, but to let you know, the power adapters used
> for IBM ThinkPads are ~excellent~, and I am using a spare one on my
WRAP platform.
> The connector is correct, and the adapter accepts 100-240 VAC
> 50-60Hz, with an output power of 16VDC 0-4.55A So you can plug in
anywhere with it!
>
> It probably draws more power than others, but it's a well built
> unit. They come in various part numbers, but anything for a Thinkpad
> T40 or similar will use the same connector and power.
>
> > --
> > Bill Plein
>
