Holger,
It worked perfectly. Thanks so much for the insight / help. No more
Static Routes needed on my clients.
Thanks,
Nate
On Dec 13, 2005, at 3:50 PM, Holger Bauer wrote:
Configure your pptp-subnet to be part of your lan subnet (example):
LAN: 192.168.50.1/24
PPTP-Server: 192.168.50.2
PPTP-Range: 192.168.50.208/29
This way your PPTP users are native members of your LAN-subnet and
you don't need any routes. Just beware that ranges should not
conflict,
so make sure 192.168.50.2 is not used by anything else, same with
192.168.50.208/29 (check dhcp ranges too).
Holger
-----Ursprüngliche Nachricht-----
Von: Nate Davis [mailto:[EMAIL PROTECTED]
Gesendet: Di 13.12.2005 22:20
An: pfsense
Cc:
Betreff: [pfSense-discussion] PPTP / IP Range
Howdy,
Let me give you some preface to what my environment is. I have a
PPTP Server setup with pfSense. Users are able to log in great.
Clients are using Microsoft's PPTP Client Built into Windows XP. I
am not using the PPTP Network as the Default Gateway. PPTP Network
is: 192.168.25.192 /28
Real Network (LAN) is: 192.168.50.1/24
My Problem is, unless I add a static route on the individual
computers, I am not able to ping the 192.168.50.0 network. I
completely understand why I can't ping it. My question to the list
is: In the PPTP Config page in pfSense, can I make the PPTP server
address be something like 192.168.50.250 and the PPTP clients be
something like: 192.168.50.192 /28? If this will not work, is there
some way I can put these PPTP clients on the same subnet as my LAN
network so I don't have to setup Static routes on the individual
computers? We are talking about maybe 15 people total that would be
in at one given time. Or is there some better way to do what I am
trying to accomplish?
Thanks so much,
Nate
____________
Virus checked by G DATA AntiVirusKit
