One more question about polling, in PfSense, if I turn on polling, but I have 1 interface that doesn't support it, does that mean they all don't have polling turned on? Or is it activated just for the ones that do support it, and the ones that don't use the regular interupt system?
----- Original Message ----- From: "Scott Ullrich" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Wednesday, February 15, 2006 7:32 AM Subject: Re: [pfSense-discussion] Polling? SUPPORTED DEVICES Device polling requires explicit modifications to the device drivers. As of this writing, the bge(4), dc(4), em(4), fwe(4), fwip(4), fxp(4), ixgb(4), nge(4), re(4), rl(4), sf(4), sis(4), ste(4), vge(4), vr(4), and xl(4) devices are supported, with others in the works. The modifications are rather straightforward, consisting in the extraction of the inner part of the interrupt service routine and writing a callback function, *_poll(), which is invoked to probe the device for events and process them. (See the conditionally compiled sections of the devices mentioned above for more details.) As in the worst case the devices are only polled on clock interrupts, in order to reduce the latency in processing packets, it is not advisable to decrease the frequency of the clock below 1000 Hz. On 2/14/06, DarkFoon <[EMAIL PROTECTED]> wrote: > > I can't seem to find a list of devices that support polling on the site. > Is it the exact same list as the one for m0n0wall? > If so, may I reccomend that someday somebody make a more detailed list? > For example, the m0n0wall website says that some support hardware VLAN > tagging while others support long frames. It implies that these two are > related, but they sound like different things (to me at least).
