Use policybased routing to send out VPN traffic only at one WAN. Haven't had 
the issue with my dual WAN setup yet but try if this resolves the problem. Some 
services are not very compatible with multiwan.

Holger

> -----Original Message-----
> From: Allen Laymon [mailto:[EMAIL PROTECTED]
> Sent: Tuesday, June 27, 2006 7:10 PM
> To: [email protected]
> Subject: RE: [pfSense-discussion] load balancing - fail over
> 
> 
> I'm having an issue using load balancing/failover and using a 
> Cisco VPN
> client to connect to a remote machine.  It's hit and miss 
> whether or not the
> Cisco VPN client works.  It appears to go out one of my internet
> connections, but can return on the second internet 
> connection?  I'm not sure
> how to resolve this.  Anyone have a similar instance?
> 
> Allen 
> -----Original Message-----
> From: Holger Bauer [mailto:[EMAIL PROTECTED] 
> Sent: Tuesday, June 27, 2006 8:06 AM
> To: [email protected]
> Subject: RE: [pfSense-discussion] load balancing - fail over
> 
> In case both WANs are available the connections will be 
> distributed to the
> WANs roundrobin. This waya you can hit the full bandwidth of 
> both WANs even
> with a single client as long as you use multiple connections 
> (like with
> downloadmanagers for example or if you open a HTTP Webpage 
> with images from
> different sites).
> In case one of the WANs fails you'll end up with "(total 
> bandwidth of all
> WANs) - (WANs that are down)" (You can have as much WANs in a 
> pool like your
> hardware can handle). The monitor IPs of the WANs are polled every 5
> seconds, so downtime of a WAN is detected rather quick.
> 
> Holger
> 
> -----Original Message-----
> From: Nelu Sofrone [mailto:[EMAIL PROTECTED]
> Sent: Tuesday, June 27, 2006 2:36 PM
> To: [email protected]
> Subject: [pfSense-discussion] load balancing - fail over
> 
> 
> Hi all!
> 
> 
> 
> I have a question about load balancing - fail over.
> 
> 
> 
> I have 2 Internet connections and I made some tests about 
> fail over. I set
> the firewall rules with gateway on pooling interface and fail 
> over worked
> ok. I don't understood how work load balancing.
> 
> My scenario is:
> 
> 2 Internet connection - work normally
> 
> 1 pool for Internet connections
> 
> The firewall's rules have the gateway on pool interface.
> 
> 
> 
> In this case, is my bandwidth of internet the sun of 
> bandwidth of internets
> connection or is only one internet connection use and second internet
> connection is use only in case of fail the first internet connection?
> 
> 
> 
> Thank you.
> 
> ____________________________________________________
> Nelu SOFRONE
> System Engineer
> Aker Braila SA 
> tel: +40 239 60 70 55
> 
> ____________________________________________________ 
> 
> ____________
> Virus checked by G DATA AntiVirusKit
> 
> 
> 

____________
Virus checked by G DATA AntiVirusKit

Reply via email to