You can add additional IPs at firewall>Virtual IP. After you added them there you can use these for NAT. Make sure you add appropriate firewallrules for this additional traffic (let them autocreate when using protforwarding, it sets up the right rules for you).
Holger > -----Original Message----- > From: Robert Mortimer [mailto:[EMAIL PROTECTED] > Sent: Friday, August 18, 2006 10:55 PM > To: email@example.com > Subject: Re: [pfSense-discussion] Multiple IP on WAN > > > Try > > Interfaces > Assign > VLAN > > I think this is what you want > > ---Robert > > ----- Original Message ----- > From: "Chris Noble" <[EMAIL PROTECTED]> > To: <firstname.lastname@example.org> > Sent: Friday, August 18, 2006 7:27 PM > Subject: [pfSense-discussion] Multiple IP on WAN > > > > > > Hi there, > > > > I have 8 ips with my isp and would like to use PPPoE on my > > linksys router.. I can do this but for 1 ip. > > > > Is there anywhere that I can set a local ip eg 10.0.0.1/8 and then > > my isp ip range which is say 18.104.22.168/29. One IP is a dedicated > > router IP and I would like that ip on the pfsense router. It can be > > done manually if I ssh into the machine, but cannot find anywhere to > > add another ip to the WAN interface. > > > > I hope I explained it clearly. > > > > Any ideas? > > > > Many thanks, > > Chris > > > > >