No. Your line has upstream and downstream. 384 kbit is most likely only one way, eihter up or down. You have to put both in at the first page of the trafficshaperwizard. As you are on DSL you have to substract a bit for the pppoe overhead. I recommend doing some up and downloads to/from a fast server if you don't know your bandwidth and watch status>trafficgraph to find your limits for both directions.
Holger -----Original Message----- From: Kim C. Callis [mailto:[EMAIL PROTECTED] Sent: Monday, September 18, 2006 11:59 PM To: [email protected] Subject: [pfSense-discussion] Proper setting for traffic shaping I have a 384K DSL connection, and I don't understand what I should be adding for traffic shapping... I put down 10000kbit for the LAN (IN) side and 256Kbit for the WAN (Out)... Was that the correct entries for the shapper? -- Kim C. Callis [EMAIL PROTECTED] _____________________________________ "A human being should be able to change a diaper, plan an invasion, butcher a hog, conn a ship, des ign a building, write a sonnet, balance accounts, build a wall, set a bone, comfort the dying, take orders, give orders, cooperate, act alone, solve equations, analyze a new problem, pitch manure, program a computer, cook a tasty meal, fight efficiently a nd die gallantly. Specialization is for insects!" -- Robert A. Heinlein
