I am not certain I explained it correctly. The pfsense built in PPTP server answers correctly on the WAN address. But it doesn't answer at all on the WAN2 address, regardless of rules in the FW for that interface. I just wondered if it was a limitation of that PPTP server/setup. I am using a load balanced/failover setup and just wanted to make sure that was not an option if I have people asking me about it.
Thanks -- Heath Henderson [EMAIL PROTECTED] 1800 288 7750 -- > From: DarkFoon <[EMAIL PROTECTED]> > Reply-To: <[email protected]> > Date: Tue, 17 Oct 2006 20:19:31 -0700 > To: <[email protected]> > Subject: Re: [pfSense-discussion] PPTP VPN on OPT1/WAN2 > > Seems to me that with PPTP (and other protocols) if the source IP address of > packets sent to the client differs from the IP the client sends packets to, > the PPTP software discards (as it should) the packets because they could be > coming from an untrusted third-party. > > ----- Original Message ----- > From: "Heath Henderson" <[EMAIL PROTECTED]> > To: <[email protected]> > Sent: Tuesday, October 17, 2006 7:51 PM > Subject: [pfSense-discussion] PPTP VPN on OPT1/WAN2 > > >> Does anyone know if there is a limitation to the PPTP VPN connection to > only >> connect via WAN connection and not vai OPT1 or WAN2? >> >> I have a successful server running and can connect via WAN but times out >> whenever I try and hit the WAN2/OPT1 connection with the same setup. I >> checked all of my rules and they are identical. >> >> Thanks >> >> -- >> Heath Henderson >> [EMAIL PROTECTED] >> 1800 288 7750 >> -- >> >> >> >
