Benno, thanks for this great writeup!
I am working on a portable squeezebox solution that works on a sub $50 A10 based Android computer on which I have installed a Linaro distribution and a recent kernel. The box I am using is the Miniand MiniX, which has very decent capabilities linaro@linaro-alip:~$ cat /proc/cpuinfo Processor : ARMv7 Processor rev 2 (v7l) BogoMIPS : 1001.88 Features : swp half thumb fastmult vfp edsp neon vfpv3 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x3 CPU part : 0xc08 CPU revision : 2 Hardware : sun4i Revision : 0000 Serial : 0000000000000000 Additional info here https://www.miniand.com/forums/forums/4/topics/111 I have dumped a few changes I made on the box here http://minixsqueeze.blogspot.ca/ I used your script mainly because I wanted to keep the analog output distinct from a USB sound device when controlling the server and keep them as "zones". So far, I tested 2 simultaneous devices using the internal analog output (which has a very low signal/noise ratio and a lot of hiss) and a good old SB Live! 24-bit External, and the little computer doesn't break a sweat on the task. I have a few cheap USB CMedia adapter on order and will expand the number of outputs just to see how far I can push it. thanks again for sharing! ------------------------------------------------------------------------ sle118's Profile: http://forums.slimdevices.com/member.php?userid=35009 View this thread: http://forums.slimdevices.com/showthread.php?t=96210 _______________________________________________ diy mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/diy
