Hiya, mikeh49 wrote: > It's a MN32032A display module. The spec sheet is in the link. > http://www.noritake-itron.com/NewWeb/Glass/specs/MN32032A.pdf > > Thank you for that, that's very helpful - so it should be around 55 > volts, not, err, 1 volt. Now, the line of diodes/capacitors at the top > edge of the display board, is that a voltage doubler? I'm just wondering > if I(/we*) need to start considering changing the surface mount > components on there - and how far I (/we) want to be going. > > > > mikeh49 wrote: > > You can use Net::UDP to talk to and configure the SB. Might help with > > the dead display. > > http://forums.slimdevices.com/showthread.php?57861-Net-UDAP-SqueezeBox-Receiver-configuration-tool> > > > > > I don't know if I'm being attrociously dumb here (not abnormal), but I > think the SB2 needs to connect to the network before it'll use that? > And although I've had a couple of stabs at negotiating the set-up menu > without a screen, I've not had any success yet in getting it to > actually connect. I'm not sure if it's trying to connect wirelessly, > which is what I'd actually like it to do when it's working, but at the > moment a wired connection would be much easier. > > Is there some way to force it to connect on the wired network without > negotiating the menu? > > *It will probably by my very nice friend John, or at least, his kit. I > may do some of the actual soldering, but fault finding is much more > his field.
------------------------------------------------------------------------ pyoorkate's Profile: http://forums.slimdevices.com/member.php?userid=63538 View this thread: http://forums.slimdevices.com/showthread.php?t=102455 _______________________________________________ diy mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/diy
