pippin wrote: > I have to admit I didn't test too much beyond my own use case, I did > have some experiments running early on with different edge > configurations but only tested the final version with the one I actually > used, which is the one above. > Using the rising edge gave me too much chatter, that's why i used the > falling one, both worked, too, but I don't exactly remember the behavior > for rising. > > I'll set up another test device over the weekend and play around a bit > with different configurations. > For what it's worth, I've tried rpi3, and rpi2 rev 1.2
> > Regarding the 3.3V... my main issue with that was that I didn't want to > recommend it because it's so easy to do wrong. > I've got bad memories from that "how-to" about connecting the 7"-display > using power from the GPIO connector on the HiFiBerry board which you can > find everywhere on the Internet and which tried to get ground from one > of the GPIO pins... All in what you are used to.....but i guess it's easier to find ground..... lol. ------------------------------------------------------------------------ paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=107001 _______________________________________________ diy mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/diy
