I have a total of three USB adapters. Two are C-Media and the other is made by iLUV. Both of these types are recognized by picoreplayer on my Raspberry Pi 3 when I issue the command aplay -I as below: tc@piCorePlayer:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA] Subdevices: 7/7 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice #5: subdevice #5 Subdevice #6: subdevice #6 card 0: ALSA [bcm2835 ALSA], device 1: bcm2835 IEC958/HDMI [bcm2835 IEC958/HDMI] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: Set [C-Media USB Headphone Set], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0
and when I issue aplay -L: tc@piCorePlayer:~$ aplay -L null Discard all samples (playback) or generate zero samples (capture) sysdefault:CARD=ALSA bcm2835 ALSA, bcm2835 ALSA Default Audio Device sysdefault:CARD=Set C-Media USB Headphone Set, USB Audio Default Audio Device front:CARD=Set,DEV=0 C-Media USB Headphone Set, USB Audio Front speakers surround21:CARD=Set,DEV=0 C-Media USB Headphone Set, USB Audio 2.1 Surround output to Front and Subwoofer speakers surround40:CARD=Set,DEV=0 C-Media USB Headphone Set, USB Audio 4.0 Surround output to Front and Rear speakers surround41:CARD=Set,DEV=0 C-Media USB Headphone Set, USB Audio 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=Set,DEV=0 C-Media USB Headphone Set, USB Audio 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=Set,DEV=0 C-Media USB Headphone Set, USB Audio 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=Set,DEV=0 C-Media USB Headphone Set, USB Audio 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=Set,DEV=0 C-Media USB Headphone Set, USB Audio IEC958 (S/PDIF) Digital Audio Output So picoreplayer is recognizing it. I can select front:CARD=Set,DEV=0 and piCoreplayer accepts this and starts Squeezelite successfully. However, nothing comes out of the headphone jack. I have the HDMI plug going to my TV and I get sound out of it. I have seen others talk about getting the C-Media to work with Squeezeplug so I am curious about what I am missing in my setup. By the way the iLUV adapter shows up as MicARRAY and can be selected but it does not work either. No headphone output. Any help would be greatly appreciated. Glenn. ------------------------------------------------------------------------ stampeder's Profile: http://forums.slimdevices.com/member.php?userid=69368 View this thread: http://forums.slimdevices.com/showthread.php?t=110892 _______________________________________________ diy mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/diy
