Marsupial wrote: > I have a raspberry pi that I would pair with the changer, and access to > ethernet not too far. > > What I'm missing is audio input to the pi. > > I've seen I2C ADC for next to nothing on eBay but doubt this will be > good enough..?
Behringer UCA 202 - I have 2 and they work fine into a Pi2 and a Pi3 although a purist would say use a Pi4 as the USB is separated from the Ethernet in the later model. Only about £25 but they are limited to 16/44.1 or 16/48 - more than enough for vinyl. I take the audio via alsa input into Liquidsoap, then out to an Icecast server on the Pi. It streams out in FLAC quality. I then "Tune in URL" in LMS. There is a noticeable lag. I run the Behringer inline from source to an aux socket on my amp. This effectively does a passthru of the audio signal if you arent using the streaming mode. Alternatively use piCorePlayer and enable pcp Streamer. This does essentially the same but when I first tried it it ihad pops and clicks which my homebrew solution doesn't. It may well be better now we are at 6.10. piCorePlayer also works with a Behringer UCS 202 confirmed. https://www.gear4music.com/Recording-and-Computers/Behringer-UCA202-Audio-Interface/79E?origin=product-ads&gclid=EAIaIQobChMI5du9pN_t6gIVn4BQBh3U7AzCEAQYASABEgKu3fD_BwE VB2.4[/B] STORAGE *QNAP TS419P (NFS) [B]Living Room* - Joggler & SB3 -> Onkyo TS606 -> Celestion F20s *Office* - Pi3+Sreen -> Sony TAFE320 -> Celestion F10s / Pi2+DAC & SB3 -> Onkyo CRN755 -> Wharfedale Modus Cubes *Dining Room* -> SB Boom *Kitchen* -> UE Radio (upgraded to SB Radio) *Bedroom (Bedside)* - Pi2+DAC ->ToppingTP21 ->AKG Headphones *Bedroom (TV)* - SB Touch ->Sherwood AVR ->Mordaunt Short M10s Everything controlled by iPeng ------------------------------------------------------------------------ d6jg's Profile: http://forums.slimdevices.com/member.php?userid=44051 View this thread: http://forums.slimdevices.com/showthread.php?t=105279
_______________________________________________ diy mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/diy
