Meant to close out this thread a while back, see below On 27 January 2017 at 17:38, Tore Anderson <t...@fud.no> wrote: > * Derek Higgins > >> I've been trying lately to get iPXE to work over DHCPv6 with dsnmasq >> and have had no luck, Is it possible to do this with dnsmasq and >> DHCPv6 and if so are there any examples out there? >> >> I've been trying >> --dhcp-option="option6:bootfile-url,http://[1:2::3:4]:8088/boot.ipxe"
as it turned out the problem was that the IP I was using (1:2::3:4 was an example), had a section with leading a zero and another without. The UEFI firmware that I was using doesn't allow this https://bugzilla.tianocore.org/show_bug.cgi?id=409 in other words fc00:0101::1 - Wont work fc00:101::1 - Worked fine I then hit another problem, but I'll start another thread about it. >> with a combination of different things, none of which I've gotten to >> work, tcpdump shows the bootfile-url at least being sent in the dhcp6 >> advertise but then the UEFI firmware seems to ignore it > > Have you tried using a tftp:// URL instead of http://? Not sure you can > rely on a UEFI firmware to implement HTTP. > > Tore _______________________________________________ Dnsmasq-discuss mailing list Dnsmasq-discuss@lists.thekelleys.org.uk http://lists.thekelleys.org.uk/mailman/listinfo/dnsmasq-discuss