Hi,
As to the missing </xsl:if> tag in the customization example below: a copy
fault, occurring quite frequently when copying something from sources all over
the web.
But I did not report any XSLT syntax error being my current issue. Be assured,
that the XSL customization layer I use is both well-formed and valid.
Eventually, after a series of misunderstandings the intended appendix elements
(figures, tables, examples) are written to the end of FO output.
HOWEVER:
(1)
As TOC entry I currently receive: "APPENDIX A. List of Figures, Tables,
Examples .................................... " yet without a page number
being displayed and therefore not a clickable TOC entry, which is rather
unpleasant.
So, how can I configure an appendix TOC entry according to the common chapter
or section TOC entries?
(2)
Furthermore, the appendix configured this way does not have a title (like:
"APPENDIX") displayed on the page, the appendix starts with. Instead of first
showing an appendix title, the figure element title ("List of Figures") is
directly displayed. How could I possibly adjust this? The related DocBook XML
contains an appendix element with a "role=lot" attribute, a specified title and
an "id=app_a" attribute, which does not prevent the Apache 1.1 FOP from
displaying a "WARNING: Page 3: Unresolved ID reference "app_a" found." which is
"WARNING: Page 3: Unresolved ID reference "d61e2804" found." otherwise, when
not specifying an 'id' attribute value.
Kai
Von: Kallauch, Benjamin (EEIN) [mailto:[email protected]]
Gesendet: Montag, 20. April 2015 17:24
An: [email protected]
Betreff: AW: [docbook-apps] Listings placeable at the End of Printed Output?
Kai,
I checked the example as well, using Xalan/FOP1.1 and DB4.5. Everything is
fine, and I received the LOTs within my appendix at the end of the document.
Maybe some ideas:
- Check if you had an appendix element with a role attribute filled
with 'lot'.
- Check your template. The template below is not well formed by the
way (missing closing xs:if element.)
Regards,
Ben
Von: Eisele, Kai Alexander [mailto:[email protected]]
Gesendet: Montag, 20. April 2015 14:02
An: [email protected]<mailto:[email protected]>
Betreff: AW: [docbook-apps] Listings placeable at the End of Printed Output?
No problem... I had also already tried leaving out the namespace prefix, the
result is the same: No appendix is created at the end of the PDF.
Currently, I am using the following customization (extract):
<?xml version='1.0'?>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform";
xmlns:fo="http://www.w3.org/1999/XSL/Format";
xmlns:d="http://docbook.org/ns/docbook"; version="1.0">
...
<xsl:import href="C:/opt/tools/docbook-xsl-1.78.1/fo/docbook.xsl"/>
...
<xsl:param name="generate.toc">
appendix nop <!-- tried also: toc,title resp.
toc,title,figure,table,example -->
...
book toc,title
...
</xsl:param>
<!-- Template adjustment to have lists of titles (figures, tables,
examples) attached to the end of printed output -->
<xsl:template match="appendix[@role = 'lot']">
<xsl:variable name="lot-master-reference">
<xsl:call-template name="select.pagemaster">
<xsl:with-param name="pageclass" select="'lot'"/>
</xsl:call-template>
</xsl:variable>
<xsl:if test="//figure">
<xsl:call-template name="page.sequence">
<xsl:with-param name="master-reference"
select="$lot-master-reference"/>
<xsl:with-param name="element" select="'toc'"/>
<xsl:with-param name="gentext-key" select="'ListofFigures'"/>
<xsl:with-param name="content">
<xsl:call-template name="list.of.titles">
<xsl:with-param name="titles" select="'figure'"/>
<xsl:with-param name="nodes" select="//figure"/>
</xsl:call-template>
</xsl:with-param>
</xsl:call-template>
<xsl:if test="//table">
<xsl:call-template name="page.sequence">
<xsl:with-param name="master-reference"
select="$lot-master-reference"/>
<xsl:with-param name="element" select="'toc'"/>
<xsl:with-param name="gentext-key" select="'ListofTables'"/>
<xsl:with-param name="content">
<xsl:call-template name="list.of.titles">
<xsl:with-param name="titles" select="'table'"/>
<xsl:with-param name="nodes" select="//table"/>
</xsl:call-template>
</xsl:with-param>
</xsl:call-template>
</xsl:if>
<xsl:if test="//example">
<xsl:call-template name="page.sequence">
<xsl:with-param name="master-reference"
select="$lot-master-reference"/>
<xsl:with-param name="element" select="'toc'"/>
<xsl:with-param name="gentext-key" select="'ListofExamples'"/>
<xsl:with-param name="content">
<xsl:call-template name="list.of.titles">
<xsl:with-param name="titles" select="'example'"/>
<xsl:with-param name="nodes" select="//example"/>
</xsl:call-template>
</xsl:with-param>
</xsl:call-template>
</xsl:if>
</xsl:template>
...
</xsl:stylesheet>
For me it seems as if only the standard creation of Lists of Titles in the
document's front were working in DocBook V4.5
Kai Alexander Eisele
CENIT AG
-----Ursprüngliche Nachricht-----
Von: Bob Stayton [mailto:[email protected]]
Gesendet: Freitag, 17. April 2015 18:15
An: Eisele, Kai Alexander;
[email protected]<mailto:[email protected]>
Betreff: Re: AW: [docbook-apps] Listings placeable at the End of Printed Output?
Sorry, I assumed you were using DocBook5 and the namespaced version of
the stylesheets, now I see that you are using DocBook 4. In the
customization I gave you, just remove the "d:" namespace prefix from the
element names, then the stylesheet will recognize the elements in your document.
Bob Stayton
Sagehill Enterprises
[email protected]<mailto:[email protected]>
On 4/17/2015 2:54 AM, Eisele, Kai Alexander wrote:
> Hi,
>
> Sorry, but this does not work for me.
>
> Here some relevant data, that may be necessary for further analysis:
>
> _Used tools/software_
>
> __
>
> XSLT Processor: Saxon Version 9-5-1-8
>
> FO Processor: Apache FOP 1.1
>
> XSL Stylesheet Files Distribution: ZIP-Release 1.78.1 downloaded from
> sourceforge.net
>
> DocBook V4.5 edited with XMLmind XML Editor Professional Edition 6.1.0
>
> I inserted the following passages into my XSL customization layer:
>
> <?xml version='1.0'?>
>
> <xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform";
> xmlns:fo="http://www.w3.org/1999/XSL/Format";
> xmlns:d="http://docbook.org/ns/docbook"; version="1.0">
>
> ...
>
> <xsl:import
> href="C:/opt/tools/docbook-xsl-1.78.1/fo/docbook.xsl"/>
>
> ...
>
> <xsl:param name="generate.toc">
>
> appendix nop <!-- tried also: toc,title resp.
> toc,title,figure,table,example -->
>
> ...
>
> book toc,title
>
> ...
>
> </xsl:param>
>
> <!-- Template adjustment to have lists of titles (figures,
> tables,
> examples) attached to the end of printed output -->
>
> <!-- Declared d xml namespace on top as you can see, yet not
> sure, whether that is neither correct nor required in DocBook V4.5 -->
>
> <xsl:template match="d:appendix[@role = 'lot']">
>
> <xsl:variable name="lot-master-reference">
>
> <xsl:call-template name="select.pagemaster">
>
> <xsl:with-param name="pageclass" select="'lot'"/>
>
> </xsl:call-template>
>
> </xsl:variable>
>
> <xsl:if test="//d:figure">
>
> <xsl:call-template name="page.sequence">
>
> <xsl:with-param name="master-reference"
>
> select="$lot-master-reference"/>
>
> <xsl:with-param name="element" select="'toc'"/>
>
> <xsl:with-param name="gentext-key"
> select="'ListofFigures'"/>
>
> <xsl:with-param name="content">
>
> <xsl:call-template name="list.of.titles">
>
> <xsl:with-param name="titles" select="'figure'"/>
>
> <xsl:with-param name="nodes" select="//d:figure"/>
>
> </xsl:call-template>
>
> </xsl:with-param>
>
> </xsl:call-template>
>
> <xsl:if test="//d:table">
>
> <xsl:call-template name="page.sequence">
>
> <xsl:with-param name="master-reference"
>
> select="$lot-master-reference"/>
>
> <xsl:with-param name="element" select="'toc'"/>
>
> <xsl:with-param name="gentext-key"
> select="'ListofTables'"/>
>
> <xsl:with-param name="content">
>
> <xsl:call-template name="list.of.titles">
>
> <xsl:with-param name="titles" select="'table'"/>
>
> <xsl:with-param name="nodes" select="//d:table"/>
>
> </xsl:call-template>
>
> </xsl:with-param>
>
> </xsl:call-template>
>
> </xsl:if>
>
> <xsl:if test="//d:example">
>
> <xsl:call-template name="page.sequence">
>
> <xsl:with-param name="master-reference"
>
> select="$lot-master-reference"/>
>
> <xsl:with-param name="element" select="'toc'"/>
>
> <xsl:with-param name="gentext-key"
> select="'ListofExamples'"/>
>
> <xsl:with-param name="content">
>
> <xsl:call-template name="list.of.titles">
>
> <xsl:with-param name="titles" select="'example'"/>
>
> <xsl:with-param name="nodes" select="//d:example"/>
>
> </xsl:call-template>
>
> </xsl:with-param>
>
> </xsl:call-template>
>
> </xsl:if>
>
> </xsl:template>
>
> ...
>
> </xsl:stylesheet>
>
> As to the appendix' customization's result in printed output, it just
> seems to be ignored by XSLT and FOP.
>
> The processors run through it without any warnings or error messages,
> everything appears to be alright, yet no appendix is created in the PDF.
> Only the standard book TOC is available in the front of the document.
>
> Maybe I should try the alternative, you mentioned, which is to let the
> stylesheet create an appendix or appendices automatically?
>
> Because that is, what should be done as a rule by the XSL
> customization layer we need for our print output documentation purposes.
>
> Regards
>
> Kai Alexander Eisele
>
> -----Ursprüngliche Nachricht-----
> Von: Bob Stayton [mailto:[email protected]]
> Gesendet: Mittwoch, 15. April 2015 18:02
> An: Eisele, Kai Alexander;
> [email protected]<mailto:[email protected]>
> Betreff: Re: [docbook-apps] Listings placeable at the End of Printed Output?
>
> Hi,
>
> Yes, it is possible to do this. You could get the stylesheet to do it
> automatically, but you could also use a special appendix file as you
> suggest to trigger it only for certain documents. That appendix would
> need a role attribute to trigger the special processing.
>
> In the template matching on the book element in fo/division.xsl, it
> calls the "make.book.tocs" template before the content. That template
> checks the "generate.toc" stylesheet param to see which lists to
> generate. You would want to set "generate.toc" to just "book toc,title"
>
> so it doesn't generate the other lists in the front.
>
> Then you create a custom template for your special appendix to
> generate the lists of titles, borrowing much of the code from the
> "make.book.tocs" template, something like:
>
> <xsl:template match="d:appendix[@role = 'lot']">
>
> <xsl:variable name="lot-master-reference">
>
> <xsl:call-template name="select.pagemaster">
>
> <xsl:with-param name="pageclass" select="'lot'"/>
>
> </xsl:call-template>
>
> </xsl:variable>
>
> <xsl:if test="//d:figure">
>
> <xsl:call-template name="page.sequence">
>
> <xsl:with-param name="master-reference"
>
> select="$lot-master-reference"/>
>
> <xsl:with-param name="element" select="'toc'"/>
>
> <xsl:with-param name="gentext-key" select="'ListofFigures'"/>
>
> <xsl:with-param name="content">
>
> <xsl:call-template name="list.of.titles">
>
> <xsl:with-param name="titles" select="'figure'"/>
>
> <xsl:with-param name="nodes" select="//d:figure"/>
>
> </xsl:call-template>
>
> </xsl:with-param>
>
> </xsl:call-template>
>
> <!-- repeat for tables, examples, etc. -->
>
> </xsl:if>
>
> Note you need to change the select attribute for figure from .//figure
> (the context relative to the book element) to //figure so the appendix
> context can find the figure elements.
>
> This special appendix will also generate an entry in the main TOC,
> unless you further customize to turn that off or change its appearance.
>
> Bob Stayton
>
> Sagehill Enterprises
>
> [email protected]<mailto:[email protected]> <mailto:[email protected]>
>
> On 4/15/2015 3:11 AM, Eisele, Kai Alexander wrote:
>
> > Hi,
>
> >
>
> > Is there any chance to have lists of figures, tables and examples
>
> > positioned at the end of printed output (PDF documents)?
>
> >
>
> > By default, the listings appear at the beginning of the documents
>
> > right after the actual TOC.
>
> >
>
> > Is it possible to customize a sort of document appendix, that
> contains
>
> > the lists of figures, tables and examples?
>
> >
>
> > Regards
>
> >
>
> >
>
> > *Kai Alexander Eisele*
>
> > SAP CC
>
> >
>
> > *CENIT AG *
>
> > Industriestraße 52-54
>
> > D-70565 Stuttgart
>
> > Phone: +49 (0) 711-78 25-3241
>
> > Fax: +49 (0)711 7825 44-4145
>
> >
>
> > [email protected]<mailto:[email protected]> <mailto:[email protected]>
> <mailto:[email protected]>
>
> >
>
> > www.cenit.com<http://www.cenit.com> <http://www.cenit.com>
> <http://www.cenit.com/en_EN.html>__
>
> >
>
> >
>
> > CENIT AG, Industriestrasse 52-54, 70565 Stuttgart, Tel.: +49 711
>
> > 7825-30, Fax: +49 711 7825-4000, Internet:
> www.cenit.de<http://www.cenit.de>
> <http://www.cenit.de>
>
> > Geschaeftsstellen: Berlin, Frankfurt, Hamburg, Hannover, Muenchen,
>
> > Oelsnitz, Ratingen, Saarbruecken
>
> > Vorstandsmitglieder: Kurt Bengel, Matthias Schmidt
>
> > Aufsichtsratsmitglieder: Andreas Schmidt (Vorsitzender des
>
> > Aufsichtsrats), Hubert Leypoldt, Andreas Karrer
>
> > Bankverbindungen:
>
> > Deutsche Bank (BLZ 600 700 70) Kto. 1661 040 IBAN : DE85 6007 0070
>
> > 0166
>
> > 1040 00 SWIFT-CODE : DEUTDESS,
>
> > Commerzbank (BLZ 600 400 71) Kto. 532 015 500 IBAN : DE83 6004 0071
>
> > 0532
>
> > 0155 00 SWIFT-Code : COBADEFF600,
>
> > Registergericht: Amtsgericht Stuttgart
>
> > Handelsregister: HRB Nr. 19117
>
> > Umsatzsteuer: ID-Nr. DE 147 862 777
>
> >
>
>
> CENIT AG, Industriestrasse 52-54, 70565 Stuttgart, Tel.: +49 711
> 7825-30, Fax: +49 711 7825-4000, Internet: www.cenit.de<http://www.cenit.de>
> Geschaeftsstellen: Berlin, Frankfurt, Hamburg, Hannover, Muenchen,
> Oelsnitz, Ratingen, Saarbruecken
> Vorstandsmitglieder: Kurt Bengel, Matthias Schmidt
> Aufsichtsratsmitglieder: Andreas Schmidt (Vorsitzender des
> Aufsichtsrats), Hubert Leypoldt, Andreas Karrer
> Bankverbindungen:
> Deutsche Bank (BLZ 600 700 70) Kto. 1661 040 IBAN : DE85 6007 0070
> 0166
> 1040 00 SWIFT-CODE : DEUTDESS,
> Commerzbank (BLZ 600 400 71) Kto. 532 015 500 IBAN : DE83 6004 0071
> 0532
> 0155 00 SWIFT-Code : COBADEFF600,
> Registergericht: Amtsgericht Stuttgart
> Handelsregister: HRB Nr. 19117
> Umsatzsteuer: ID-Nr. DE 147 862 777
>
CENIT AG, Industriestrasse 52-54, 70565 Stuttgart, Tel.: +49 711 7825-30, Fax:
+49 711 7825-4000, Internet: www.cenit.de<http://www.cenit.de>
Geschaeftsstellen: Berlin, Frankfurt, Hamburg, Hannover, Muenchen, Oelsnitz,
Ratingen, Saarbruecken
Vorstandsmitglieder: Kurt Bengel, Matthias Schmidt
Aufsichtsratsmitglieder: Andreas Schmidt (Vorsitzender des Aufsichtsrats),
Hubert Leypoldt, Andreas Karrer
Bankverbindungen:
Deutsche Bank (BLZ 600 700 70) Kto. 1661 040 IBAN : DE85 6007 0070 0166 1040 00
SWIFT-CODE : DEUTDESS,
Commerzbank (BLZ 600 400 71) Kto. 532 015 500 IBAN : DE83 6004 0071 0532 0155
00 SWIFT-Code : COBADEFF600,
Registergericht: Amtsgericht Stuttgart
Handelsregister: HRB Nr. 19117
Umsatzsteuer: ID-Nr. DE 147 862 777
CENIT AG, Industriestrasse 52-54, 70565 Stuttgart, Tel.: +49 711 7825-30, Fax:
+49 711 7825-4000, Internet: www.cenit.de
Geschaeftsstellen: Berlin, Frankfurt, Hamburg, Hannover, Muenchen, Oelsnitz,
Ratingen, Saarbruecken
Vorstandsmitglieder: Kurt Bengel, Matthias Schmidt
Aufsichtsratsmitglieder: Andreas Schmidt (Vorsitzender des Aufsichtsrats),
Hubert Leypoldt, Andreas Karrer
Bankverbindungen:
Deutsche Bank (BLZ 600 700 70) Kto. 1661 040 IBAN : DE85 6007 0070 0166 1040 00
SWIFT-CODE : DEUTDESS,
Commerzbank (BLZ 600 400 71) Kto. 532 015 500 IBAN : DE83 6004 0071 0532 0155
00 SWIFT-Code : COBADEFF600,
Registergericht: Amtsgericht Stuttgart
Handelsregister: HRB Nr. 19117
Umsatzsteuer: ID-Nr. DE 147 862 777
