Hi, sorry for misunderstanding. It was not my intention to make you look a fool. I simply couldn't understand the problem, because the example was plain enough and was running at once with my config. Sometimes I see really strange side effects when parsing/transforming invalid XML... So, I thought, let you know that it was not well formed, is a good idea. Ok, it wasn't. ;-)
Regarding the issue: Combining the standard match="appendix" template from fo/components.xsl helped me a little bit. At least you get an appendix title and a page number. Therefore, a toc entry with page number with link and also PDF bookmark. Nevertheless: There is some fine tuning to do. Still, the LOTs don't have titles generated in the toc. I hope I didn't get you wrong again. regards, Ben Von: Eisele, Kai Alexander [mailto:k.eis...@cenit.de] Gesendet: Dienstag, 21. April 2015 16:35 An: docbook-apps@lists.oasis-open.org Betreff: AW: [docbook-apps] Listings placeable at the End of Printed Output? Hi, As to the missing </xsl:if> tag in the customization example below: a copy fault, occurring quite frequently when copying something from sources all over the web. But I did not report any XSLT syntax error being my current issue. Be assured, that the XSL customization layer I use is both well-formed and valid. Eventually, after a series of misunderstandings the intended appendix elements (figures, tables, examples) are written to the end of FO output. HOWEVER: (1) As TOC entry I currently receive: "APPENDIX A. List of Figures, Tables, Examples .................................... " yet without a page number being displayed and therefore not a clickable TOC entry, which is rather unpleasant. So, how can I configure an appendix TOC entry according to the common chapter or section TOC entries? (2) Furthermore, the appendix configured this way does not have a title (like: "APPENDIX") displayed on the page, the appendix starts with. Instead of first showing an appendix title, the figure element title ("List of Figures") is directly displayed. How could I possibly adjust this? The related DocBook XML contains an appendix element with a "role=lot" attribute, a specified title and an "id=app_a" attribute, which does not prevent the Apache 1.1 FOP from displaying a "WARNING: Page 3: Unresolved ID reference "app_a" found." which is "WARNING: Page 3: Unresolved ID reference "d61e2804" found." otherwise, when not specifying an 'id' attribute value. Kai Von: Kallauch, Benjamin (EEIN) [mailto:benjamin.kallau...@volkswagen.de] Gesendet: Montag, 20. April 2015 17:24 An: docbook-apps@lists.oasis-open.org<mailto:docbook-apps@lists.oasis-open.org> Betreff: AW: [docbook-apps] Listings placeable at the End of Printed Output? Kai, I checked the example as well, using Xalan/FOP1.1 and DB4.5. Everything is fine, and I received the LOTs within my appendix at the end of the document. Maybe some ideas: - Check if you had an appendix element with a role attribute filled with 'lot'. - Check your template. The template below is not well formed by the way (missing closing xs:if element.) Regards, Ben Von: Eisele, Kai Alexander [mailto:k.eis...@cenit.de] Gesendet: Montag, 20. April 2015 14:02 An: docbook-apps@lists.oasis-open.org<mailto:docbook-apps@lists.oasis-open.org> Betreff: AW: [docbook-apps] Listings placeable at the End of Printed Output? No problem... I had also already tried leaving out the namespace prefix, the result is the same: No appendix is created at the end of the PDF. Currently, I am using the following customization (extract): <?xml version='1.0'?> <xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"; xmlns:fo="http://www.w3.org/1999/XSL/Format"; xmlns:d="http://docbook.org/ns/docbook"; version="1.0"> ... <xsl:import href="C:/opt/tools/docbook-xsl-1.78.1/fo/docbook.xsl"/> ... <xsl:param name="generate.toc"> appendix nop <!-- tried also: toc,title resp. toc,title,figure,table,example --> ... book toc,title ... </xsl:param> <!-- Template adjustment to have lists of titles (figures, tables, examples) attached to the end of printed output --> <xsl:template match="appendix[@role = 'lot']"> <xsl:variable name="lot-master-reference"> <xsl:call-template name="select.pagemaster"> <xsl:with-param name="pageclass" select="'lot'"/> </xsl:call-template> </xsl:variable> <xsl:if test="//figure"> <xsl:call-template name="page.sequence"> <xsl:with-param name="master-reference" select="$lot-master-reference"/> <xsl:with-param name="element" select="'toc'"/> <xsl:with-param name="gentext-key" select="'ListofFigures'"/> <xsl:with-param name="content"> <xsl:call-template name="list.of.titles"> <xsl:with-param name="titles" select="'figure'"/> <xsl:with-param name="nodes" select="//figure"/> </xsl:call-template> </xsl:with-param> </xsl:call-template> <xsl:if test="//table"> <xsl:call-template name="page.sequence"> <xsl:with-param name="master-reference" select="$lot-master-reference"/> <xsl:with-param name="element" select="'toc'"/> <xsl:with-param name="gentext-key" select="'ListofTables'"/> <xsl:with-param name="content"> <xsl:call-template name="list.of.titles"> <xsl:with-param name="titles" select="'table'"/> <xsl:with-param name="nodes" select="//table"/> </xsl:call-template> </xsl:with-param> </xsl:call-template> </xsl:if> <xsl:if test="//example"> <xsl:call-template name="page.sequence"> <xsl:with-param name="master-reference" select="$lot-master-reference"/> <xsl:with-param name="element" select="'toc'"/> <xsl:with-param name="gentext-key" select="'ListofExamples'"/> <xsl:with-param name="content"> <xsl:call-template name="list.of.titles"> <xsl:with-param name="titles" select="'example'"/> <xsl:with-param name="nodes" select="//example"/> </xsl:call-template> </xsl:with-param> </xsl:call-template> </xsl:if> </xsl:template> ... </xsl:stylesheet> For me it seems as if only the standard creation of Lists of Titles in the document's front were working in DocBook V4.5 Kai Alexander Eisele CENIT AG -----Ursprüngliche Nachricht----- Von: Bob Stayton [mailto:b...@sagehill.net] Gesendet: Freitag, 17. April 2015 18:15 An: Eisele, Kai Alexander; docbook-apps@lists.oasis-open.org<mailto:docbook-apps@lists.oasis-open.org> Betreff: Re: AW: [docbook-apps] Listings placeable at the End of Printed Output? Sorry, I assumed you were using DocBook5 and the namespaced version of the stylesheets, now I see that you are using DocBook 4. In the customization I gave you, just remove the "d:" namespace prefix from the element names, then the stylesheet will recognize the elements in your document. Bob Stayton Sagehill Enterprises b...@sagehill.net<mailto:b...@sagehill.net> On 4/17/2015 2:54 AM, Eisele, Kai Alexander wrote: > Hi, > > Sorry, but this does not work for me. > > Here some relevant data, that may be necessary for further analysis: > > _Used tools/software_ > > __ > > XSLT Processor: Saxon Version 9-5-1-8 > > FO Processor: Apache FOP 1.1 > > XSL Stylesheet Files Distribution: ZIP-Release 1.78.1 downloaded from > sourceforge.net > > DocBook V4.5 edited with XMLmind XML Editor Professional Edition 6.1.0 > > I inserted the following passages into my XSL customization layer: > > <?xml version='1.0'?> > > <xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"; > xmlns:fo="http://www.w3.org/1999/XSL/Format"; > xmlns:d="http://docbook.org/ns/docbook"; version="1.0"> > > ... > > <xsl:import > href="C:/opt/tools/docbook-xsl-1.78.1/fo/docbook.xsl"/> > > ... > > <xsl:param name="generate.toc"> > > appendix nop <!-- tried also: toc,title resp. > toc,title,figure,table,example --> > > ... > > book toc,title > > ... > > </xsl:param> > > <!-- Template adjustment to have lists of titles (figures, > tables, > examples) attached to the end of printed output --> > > <!-- Declared d xml namespace on top as you can see, yet not > sure, whether that is neither correct nor required in DocBook V4.5 --> > > <xsl:template match="d:appendix[@role = 'lot']"> > > <xsl:variable name="lot-master-reference"> > > <xsl:call-template name="select.pagemaster"> > > <xsl:with-param name="pageclass" select="'lot'"/> > > </xsl:call-template> > > </xsl:variable> > > <xsl:if test="//d:figure"> > > <xsl:call-template name="page.sequence"> > > <xsl:with-param name="master-reference" > > select="$lot-master-reference"/> > > <xsl:with-param name="element" select="'toc'"/> > > <xsl:with-param name="gentext-key" > select="'ListofFigures'"/> > > <xsl:with-param name="content"> > > <xsl:call-template name="list.of.titles"> > > <xsl:with-param name="titles" select="'figure'"/> > > <xsl:with-param name="nodes" select="//d:figure"/> > > </xsl:call-template> > > </xsl:with-param> > > </xsl:call-template> > > <xsl:if test="//d:table"> > > <xsl:call-template name="page.sequence"> > > <xsl:with-param name="master-reference" > > select="$lot-master-reference"/> > > <xsl:with-param name="element" select="'toc'"/> > > <xsl:with-param name="gentext-key" > select="'ListofTables'"/> > > <xsl:with-param name="content"> > > <xsl:call-template name="list.of.titles"> > > <xsl:with-param name="titles" select="'table'"/> > > <xsl:with-param name="nodes" select="//d:table"/> > > </xsl:call-template> > > </xsl:with-param> > > </xsl:call-template> > > </xsl:if> > > <xsl:if test="//d:example"> > > <xsl:call-template name="page.sequence"> > > <xsl:with-param name="master-reference" > > select="$lot-master-reference"/> > > <xsl:with-param name="element" select="'toc'"/> > > <xsl:with-param name="gentext-key" > select="'ListofExamples'"/> > > <xsl:with-param name="content"> > > <xsl:call-template name="list.of.titles"> > > <xsl:with-param name="titles" select="'example'"/> > > <xsl:with-param name="nodes" select="//d:example"/> > > </xsl:call-template> > > </xsl:with-param> > > </xsl:call-template> > > </xsl:if> > > </xsl:template> > > ... > > </xsl:stylesheet> > > As to the appendix' customization's result in printed output, it just > seems to be ignored by XSLT and FOP. > > The processors run through it without any warnings or error messages, > everything appears to be alright, yet no appendix is created in the PDF. > Only the standard book TOC is available in the front of the document. > > Maybe I should try the alternative, you mentioned, which is to let the > stylesheet create an appendix or appendices automatically? > > Because that is, what should be done as a rule by the XSL > customization layer we need for our print output documentation purposes. > > Regards > > Kai Alexander Eisele > > -----Ursprüngliche Nachricht----- > Von: Bob Stayton [mailto:b...@sagehill.net] > Gesendet: Mittwoch, 15. April 2015 18:02 > An: Eisele, Kai Alexander; > docbook-apps@lists.oasis-open.org<mailto:docbook-apps@lists.oasis-open.org> > Betreff: Re: [docbook-apps] Listings placeable at the End of Printed Output? > > Hi, > > Yes, it is possible to do this. You could get the stylesheet to do it > automatically, but you could also use a special appendix file as you > suggest to trigger it only for certain documents. That appendix would > need a role attribute to trigger the special processing. > > In the template matching on the book element in fo/division.xsl, it > calls the "make.book.tocs" template before the content. That template > checks the "generate.toc" stylesheet param to see which lists to > generate. You would want to set "generate.toc" to just "book toc,title" > > so it doesn't generate the other lists in the front. > > Then you create a custom template for your special appendix to > generate the lists of titles, borrowing much of the code from the > "make.book.tocs" template, something like: > > <xsl:template match="d:appendix[@role = 'lot']"> > > <xsl:variable name="lot-master-reference"> > > <xsl:call-template name="select.pagemaster"> > > <xsl:with-param name="pageclass" select="'lot'"/> > > </xsl:call-template> > > </xsl:variable> > > <xsl:if test="//d:figure"> > > <xsl:call-template name="page.sequence"> > > <xsl:with-param name="master-reference" > > select="$lot-master-reference"/> > > <xsl:with-param name="element" select="'toc'"/> > > <xsl:with-param name="gentext-key" select="'ListofFigures'"/> > > <xsl:with-param name="content"> > > <xsl:call-template name="list.of.titles"> > > <xsl:with-param name="titles" select="'figure'"/> > > <xsl:with-param name="nodes" select="//d:figure"/> > > </xsl:call-template> > > </xsl:with-param> > > </xsl:call-template> > > <!-- repeat for tables, examples, etc. --> > > </xsl:if> > > Note you need to change the select attribute for figure from .//figure > (the context relative to the book element) to //figure so the appendix > context can find the figure elements. > > This special appendix will also generate an entry in the main TOC, > unless you further customize to turn that off or change its appearance. > > Bob Stayton > > Sagehill Enterprises > > b...@sagehill.net<mailto:b...@sagehill.net> <mailto:b...@sagehill.net> > > On 4/15/2015 3:11 AM, Eisele, Kai Alexander wrote: > > > Hi, > > > > > > Is there any chance to have lists of figures, tables and examples > > > positioned at the end of printed output (PDF documents)? > > > > > > By default, the listings appear at the beginning of the documents > > > right after the actual TOC. > > > > > > Is it possible to customize a sort of document appendix, that > contains > > > the lists of figures, tables and examples? > > > > > > Regards > > > > > > > > > *Kai Alexander Eisele* > > > SAP CC > > > > > > *CENIT AG * > > > Industriestraße 52-54 > > > D-70565 Stuttgart > > > Phone: +49 (0) 711-78 25-3241 > > > Fax: +49 (0)711 7825 44-4145 > > > > > > k.eis...@cenit.de<mailto:k.eis...@cenit.de> <mailto:k.eis...@cenit.de> > <mailto:k.eis...@cenit.de> > > > > > > www.cenit.com<http://www.cenit.com> <http://www.cenit.com> > <http://www.cenit.com/en_EN.html>__ > > > > > > > > > CENIT AG, Industriestrasse 52-54, 70565 Stuttgart, Tel.: +49 711 > > > 7825-30, Fax: +49 711 7825-4000, Internet: > www.cenit.de<http://www.cenit.de> > <http://www.cenit.de> > > > Geschaeftsstellen: Berlin, Frankfurt, Hamburg, Hannover, Muenchen, > > > Oelsnitz, Ratingen, Saarbruecken > > > Vorstandsmitglieder: Kurt Bengel, Matthias Schmidt > > > Aufsichtsratsmitglieder: Andreas Schmidt (Vorsitzender des > > > Aufsichtsrats), Hubert Leypoldt, Andreas Karrer > > > Bankverbindungen: > > > Deutsche Bank (BLZ 600 700 70) Kto. 1661 040 IBAN : DE85 6007 0070 > > > 0166 > > > 1040 00 SWIFT-CODE : DEUTDESS, > > > Commerzbank (BLZ 600 400 71) Kto. 532 015 500 IBAN : DE83 6004 0071 > > > 0532 > > > 0155 00 SWIFT-Code : COBADEFF600, > > > Registergericht: Amtsgericht Stuttgart > > > Handelsregister: HRB Nr. 19117 > > > Umsatzsteuer: ID-Nr. DE 147 862 777 > > > > > > CENIT AG, Industriestrasse 52-54, 70565 Stuttgart, Tel.: +49 711 > 7825-30, Fax: +49 711 7825-4000, Internet: www.cenit.de<http://www.cenit.de> > Geschaeftsstellen: Berlin, Frankfurt, Hamburg, Hannover, Muenchen, > Oelsnitz, Ratingen, Saarbruecken > Vorstandsmitglieder: Kurt Bengel, Matthias Schmidt > Aufsichtsratsmitglieder: Andreas Schmidt (Vorsitzender des > Aufsichtsrats), Hubert Leypoldt, Andreas Karrer > Bankverbindungen: > Deutsche Bank (BLZ 600 700 70) Kto. 1661 040 IBAN : DE85 6007 0070 > 0166 > 1040 00 SWIFT-CODE : DEUTDESS, > Commerzbank (BLZ 600 400 71) Kto. 532 015 500 IBAN : DE83 6004 0071 > 0532 > 0155 00 SWIFT-Code : COBADEFF600, > Registergericht: Amtsgericht Stuttgart > Handelsregister: HRB Nr. 19117 > Umsatzsteuer: ID-Nr. DE 147 862 777 > CENIT AG, Industriestrasse 52-54, 70565 Stuttgart, Tel.: +49 711 7825-30, Fax: +49 711 7825-4000, Internet: www.cenit.de<http://www.cenit.de> Geschaeftsstellen: Berlin, Frankfurt, Hamburg, Hannover, Muenchen, Oelsnitz, Ratingen, Saarbruecken Vorstandsmitglieder: Kurt Bengel, Matthias Schmidt Aufsichtsratsmitglieder: Andreas Schmidt (Vorsitzender des Aufsichtsrats), Hubert Leypoldt, Andreas Karrer Bankverbindungen: Deutsche Bank (BLZ 600 700 70) Kto. 1661 040 IBAN : DE85 6007 0070 0166 1040 00 SWIFT-CODE : DEUTDESS, Commerzbank (BLZ 600 400 71) Kto. 532 015 500 IBAN : DE83 6004 0071 0532 0155 00 SWIFT-Code : COBADEFF600, Registergericht: Amtsgericht Stuttgart Handelsregister: HRB Nr. 19117 Umsatzsteuer: ID-Nr. DE 147 862 777 CENIT AG, Industriestrasse 52-54, 70565 Stuttgart, Tel.: +49 711 7825-30, Fax: +49 711 7825-4000, Internet: www.cenit.de<http://www.cenit.de> Geschaeftsstellen: Berlin, Frankfurt, Hamburg, Hannover, Muenchen, Oelsnitz, Ratingen, Saarbruecken Vorstandsmitglieder: Kurt Bengel, Matthias Schmidt Aufsichtsratsmitglieder: Andreas Schmidt (Vorsitzender des Aufsichtsrats), Hubert Leypoldt, Andreas Karrer Bankverbindungen: Deutsche Bank (BLZ 600 700 70) Kto. 1661 040 IBAN : DE85 6007 0070 0166 1040 00 SWIFT-CODE : DEUTDESS, Commerzbank (BLZ 600 400 71) Kto. 532 015 500 IBAN : DE83 6004 0071 0532 0155 00 SWIFT-Code : COBADEFF600, Registergericht: Amtsgericht Stuttgart Handelsregister: HRB Nr. 19117 Umsatzsteuer: ID-Nr. DE 147 862 777
