Two little ideas that are worth considering as I work on Falke eng install Scheibe Falke people 30years ago are smart and idea is so simple -THe mag switch is double pole and one side up unearths mag (per usual) and other side powers up all instruments and alt field - so simple - no relays and saves power when soaring. Strange but Diamond/Hoffmann did it much more complicated and still leave instruments on when soaring (and using many ma unnecessarly)
Also having Aircraft welder convert all engine pipes to Stainless (some steel crap). To do curves we used s/s donuts of steel tube which come from Bert Flood Imports - the same diameter and tight radius. Welder has often used them (Rotax Donuts) in VWs and Rotax exhausts Thirdly enc is a little photo of the Dimona prop change limiter - Flag down and just pull handle to the plate BUT to feather flick flag up and slowly pull out handle all the way. It is so simple and beginners never get it wrong. By the way the 50mm U channel at front of prop that the 8mm rods tighen on cost $348 from old Eric at Aust Air props Ian McPhee
<<attachment: Dimonapropchange.jpg>>
--------------------------------------------------------------------- You are subscribed to the Dimona Owners Group mailing list. To unsubscribe, send email to: [email protected]
