Go to link below and go to second page and look for images with numbers 1228 to 1240 http://www.byrongliding.com/gallery/technical/index.htm The last few photos are the rubbers which have 8mm thread each end and dia 40mm and height 30mm - They will be from the local german auto accessories shop.
The images on first page are basically for Jabiru installation in Falke putting a X as the air from air filter goes into tube. For the last year LH rear we have been struggling why in hell the cylinder was 25 deg hotter than at all other cylinders AT FULL POWER. Back the power back to 75% power and all temps were even. It turned out to be the swirl or spin of the air as it goes down the inlet and at full power carby let the spinning air go straight through. Back back throttle and the tube is blocked and spinning air is stopped Today Russell White tells me it is know about spinning air in motorbike industry. I wish I new that 12 months ago!!!! and is used in the carby heat pipe in the 0 540 of Pawnee. I am slow learner I think Dafydd Llwellyn will have the Jabiru Falke installation paperwork done in next 24 hours so watch out John Viney you may have a job next week FINALLY!!! Ian M Cheers, Russell.
