Thanks Tom, Will look at mine.
Michael Stockhill On Tue, Jul 1, 2025, 3:01 PM Tom Preisser <[email protected]> wrote: > Gentlemen, I was inspecting my aileron drives through the inspection port > and noticed that, over time, the plywood mount that provides a mounting > support for the aileron bellcrank had shrunk in thickness, allowing a > slight bit of play in the bellcrank. When I checked the torque on the three > M10 bolts I found that it was insufficient on two, on both left and right > wings. Tightening the bolts is a bitch, due to the restricted access to the > nylock nuts on the blind side. I had to cut and bend a cheap M10 wrench to > complete the task. No real indication of the problem until I reached in and > wiggled the mount while watching carefully. Probably not too big of a deal. >
