Paul, I'd be interested in at least one of those power supplies. Maybe two. I'm 
working on controlling some rgb led strips with dmx for an update to the hippie 
toilet. Want to put one string around the outside circle frame.

Sova - Sent from my mobile phone, please excuse brevity and typos.
________________________________
From: Paul Stoffregen<mailto:[email protected]>
Sent: ‎8/‎13/‎2014 4:24 PM
To: [email protected]<mailto:[email protected]>
Subject: Re: [dorkbotpdx-blabber] dorkbotpdx-blabber Digest, Vol 98, Issue 17

On 08/13/2014 12:07 PM, Mykle Hansen wrote:
> Paul, what power supply would you recommend for approximately 1200 LEDS (
> 8 x 5 meters x 30 lights/meter)?

I prefer to budget 50 mA per RGB LED.  So 1200 LEDs would be 60 amps.
Some people suggest 60 mA per RGB LED.  If you're absolutely sure your
software will always restrict the brightness, or won't ever turn on more
than some fraction of them at once, you might be able to get by with a
smaller power supply.  At Maker Faire 2013 in San Mateo, the Crashspace
guys did exactly that (2000 LEDs on a fairly small power supply) and it
ran all weekend.  It did have some issues, but I'm told they were not
related to the power supply.

I have a few extra 5 volt, 40 amp power supplies left over from prior
projects.  They work great.  In fact, we used them to run LEDs at
Toorcamp.  I'm pretty sure I paid approx $30 each for them.  I'd be
happy to sell you some for $25 each.  Two should give you plenty of
power for 1200 LEDs, or you might be able to get by with only one if
you're careful with your software.

Those cheap power supplies are meant to be attached to a metal case, to
help dissipate heat.  They don't have fans.  If you skimp on cooling,
test carefully to make sure they're not getting really hot.  More
expensive power supplies usually have fans or heatsinks or both.



_______________________________________________
dorkbotpdx-blabber mailing list
[email protected]
http://music.columbia.edu/mailman/listinfo/dorkbotpdx-blabber
_______________________________________________
dorkbotpdx-blabber mailing list
[email protected]
http://music.columbia.edu/mailman/listinfo/dorkbotpdx-blabber

Reply via email to