- Description has changed:
Diff:
~~~~
--- old
+++ new
@@ -40,6 +40,3 @@
* The content is only cleared when a freshly created module is shared, modules
that have been used in a Saros session before are not affected
Sometimes it is possible to recover the lost content with Edit > Undo Reload
from Disk, but it is not always offered. When it is, the content is completely
recovered, but the client still gets inconsistency warnings. After the client
resolves them, the warnings are shown again a few seconds later.
-
-#####4. The constant part of the time it takes to establish a session is at
most 50% higher compared to Saros/E
-It takes around 40 seconds to establish a session with Saros/I and around 10
seconds with Saros/E
~~~~
---
** [bugs:#867] Saros/I session initiation fragile and slow**
**Status:** open
**Group:** OTHER
**Labels:** IntelliJ
**Created:** Mon Aug 29, 2016 11:22 AM UTC by Alexander Jakobi
**Last Updated:** Wed Sep 07, 2016 12:07 PM UTC
**Owner:** nobody
Currently the session initiation of Saros for IntelliJ is slow and fragile.
A fix should improve the situation to meet the following criteria:
#####1. Session invitations can be reliably started through the GUI
We were not able to initiate a session between a Windows 10 and a Windows 7
machine.
So far it worked to establish a session between a Windows 10 virtual machine
running on a Windows 10 host system and the host system itself. All the above
listed issues have been discovered with this setup.
We also had success in creating a session between a Windows 10 machine and a
Debian Jessie machine.
#####2. No timeouts occur, unless their origin lies outside of Saros' area of
responsibility (e.g. networking issues)
We experienced problems in the Socks5 networking code:
"DEBUG 12:28:16,896 [SOCKS5ConnectionResponse-0] (Socks5Transport.java:624)
[SOCKS5Transport] Start to establish new response connection
WARN 12:28:24,903 [pool-4-thread-1] (Socks5Transport.java:411)
[SOCKS5Transport] Couldn't accept request but still trying to establish a
response connection: Could not establish socket with any provided host
ERROR 12:28:25,520 [pool-4-thread-1] (Socks5Transport.java:440) An error
occurred while establishing a response connection"
#####3. All project resources are completely transferred
######Only Modules
When creating a session it is only possible to do so by sharing a module. It is
not possible to share a whole project consisting of multiple modules.
It is also not possible to work around this by adding additional modules to the
running session.
######Only Modules the Host Created Himself
When creating a session it is only possible to work together on a module the
initiator has created. The following scenario does **not** work:
* User A creates Project1, shares it with user B.
* End the session.
* User B can start a session on Project1 with user A or even a third user C
######File Inconsistencies
When a session is established on a freshly created module the client sees file
inconsistency warnings because the content of some files of the host has been
cleared. When resolving these inconsistencies the content gets cleared on the
client side as well.
There is no real pattern deducible as of yet:
* Happens to open files in the editor of the host as well as to closed ones
* Happens to single files in multi-file projects
* Happens to multiple files in multi-file projects
* Happens to single files in a single-file project
What we know until now is:
* The content is only cleared on the host side
* The content is only cleared when a freshly created module is shared, modules
that have been used in a Saros session before are not affected
Sometimes it is possible to recover the lost content with Edit > Undo Reload
from Disk, but it is not always offered. When it is, the content is completely
recovered, but the client still gets inconsistency warnings. After the client
resolves them, the warnings are shown again a few seconds later.
---
Sent from sourceforge.net because dpp-robot@lists.sourceforge.net is subscribed
to https://sourceforge.net/p/dpp/bugs/
To unsubscribe from further messages, a project admin can change settings at
https://sourceforge.net/p/dpp/admin/bugs/options. Or, if this is a mailing
list, you can unsubscribe from the mailing list.------------------------------------------------------------------------------
_______________________________________________
DPP-Robot mailing list
DPP-Robot@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/dpp-robot
