brian whatcott wrote:
> At 05:55 5/17/98 +0000, you wrote:
> >
>
> >My procedure has been to clamp the piece between the bending blocks on a
> >vice. Then smack at the aluminum with a ball pein hammer. After
> >looking at the piece it is now apparent that this is not correct....
> >Kevin
> >
>
> You are just one step away from the bends you want.
> To be gentle with this soft material, you need to pat it with a
> soft-face mallet.
> There are several options:
> on the traditional side, a wooden or leather face mallet
> on the modern side, a platic face mallet (with those yellow
> plastic end buttons)
> or a dead-blow plastic faced hammer.
>
> Brian Whatcott Altus OK
>
Thanks for the tips!
-----------------------------------------------------------------------------
dragonlist is hosted courtesy of Interstice Inc., a provider of reasonably
priced virtual domain hosting for the world, and dedicated circuit and
dialup for Silicon Valley. http://www.interstice.com (408) 369-4490
