Hi all
I spent the weekend finishing the bulkhead
cutting process.
I am very perturbed as to the final shape of the upper
seatback bulkhead and the canopy bulkhead.
The copy b/head seems to be 1/4" oversize on one side and
slightly oversize on the other when mated up to the center line on the upper
seatback b/head. This after very careful tracing of the pattern. I obviously
have made an error somewhere.
To rectify the problem before glassing, are the curved edges
supposed to be the same dimensions or must one of the bulkheads be oversize in
relation to the other and if so which one?
I confirm that the upper seat back b/head in my instance is of
correct dimensions.
Many thanks
Mike Wright
South Africa
