Jim <[EMAIL PROTECTED]> made an utterence to the drakelist gang ---------------------------------------------------------------------- I am using a late serial number Drake R8B that the display shows it will tune down to 10kHz. Also the serial number is high enough that Drake says the radio will tune and receive below 100kHz.
The issue is my R8B seems deaf below 100 kHz. I connect a long wire (100 feet) to the Hi-Z input and cannot even hear a whisper of WWVB at 60kHz. I have also tried a 40 meter dipole on the Lo-Z input and an active whip on the Lo-Z input with the same results. I can put the radio in the LSB mode and there is zero hint of a carrier on 60kHz. Do other Drake R8B owners have the same experience? I sent a mail to Drake and they came back saying the radio sensitivity is not spec'ed below 100kHz. That info is of little help. The did say I could send the radio into them for $25 per hour to have it checked out, but if the radio is poor (by design) below 100 kHz, why waste the money. Also, someone told me that they had a similar problem and it was a defective I.C. So...........are there other Drake R8B owners that have a radio that can "hear" below 100 kHz (WWVB for example)?? I am located in the San Diego, Ca area. Thanks again. Jim ---------------------------------------------------------------------- On Behalf of Jim <[EMAIL PROTECTED]> Submissions: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] - unsubscribe drakelist in body Hopelessly Lost: [EMAIL PROTECTED] - help in body of message Zerobeat Web Page: http://www.zerobeat.net Brought to you courtesy of TLCHost.net http://www.tlchost.net/ ----------------------------------------------------------------------
