"R. Ton" <[EMAIL PROTECTED]> made an utterence to the drakelist gang ---------------------------------------------------------------------- Many thanks, Charles! Looks like it's R45, 2 ohms. Does that look like the one? Seems to ohm out right, but everything in that part of the circuit is low resistance.
73, Rob > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > Sent: Wednesday, November 03, 2004 9:45 AM > To: R. Ton > Subject: Re: [drakelist] TR-4C Resistor help > > > I seem to remember the same problem. I don't have a > schematic handy at the moment to say exactly the value > but I seem to remember that it is under 5 ohms. I think > I paralleled two junk box resistors to get the value needed. > > Look on the schematic for the plate current shunt > resistor. It will be near the meter on the print. > > Once I replaced mine the rig seemed OK but it turned > out to have sticking contacts on the TR relay. > Probably caused the resistor to fry in the first place. > > Since I am at work I'll have to download a schematic > to say exactly which resistor it is and the value. > Perhaps I can get to it this afternoon. > > Charles > N4DKE ---------------------------------------------------------------------- On Behalf of "R. Ton" <[EMAIL PROTECTED]> Submissions: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] - unsubscribe drakelist in body Hopelessly Lost: [EMAIL PROTECTED] - help in body of message Zerobeat Web Page: http://www.zerobeat.net Brought to you courtesy of TLCHost.net http://www.tlchost.net/ ----------------------------------------------------------------------
