"Lee Bahr" <[EMAIL PROTECTED]> made an utterence to the drakelist gang ---------------------------------------------------------------------- I would say any FS-4 clone should provide steps of 100hz. (.1 Khz). Anything less then this would be a drawback and design flaw. 500 khz step spacing as described is rediculous and useless. Lee, w0vt PS: What are the LED colors?
> > "Dan Cotsirilos" <[EMAIL PROTECTED]> made an utterence to the drakelist gang > ---------------------------------------------------------------------- > First of all "hosing" was a typo I meant "housing". 12 volts would also be > needed also. Second 3 LED's was a brief description of the device. The item > will be clean. It is being designed by a ex-Collins RF engineer who can > build communications receivers from scratch so all worries of poor design > are not necessary. > > These will be available for both the 4 line and the SPR-4. It will consist > of 2 up down buttons that change in 500 khz steps. So I would like to know > what kind of interest this group would have in a correctly designed unit? > Dan > ---------------------------------------------------------------------- On Behalf of "Lee Bahr" <[EMAIL PROTECTED]> Submissions: [email protected] Unsubscribe: [EMAIL PROTECTED] - unsubscribe drakelist in body Hopelessly Lost: [EMAIL PROTECTED] - help in body of message Zerobeat Web Page: http://www.zerobeat.net Brought to you courtesy of TLCHost.net http://www.tlchost.net/ ----------------------------------------------------------------------
