Ron Wagner <[EMAIL PROTECTED]> made an utterance to the drakelist gang
----------------------------------------------------------------------
DW,
You can use almost any Q multiplier that is designed for the same IF freq.
I had a Heathkit QF1 (I think that was the model) attached to the 2B I had
at one time. I have not had a 2CQ, but based on the schematic, it would
look like it is the same (give or take) as the 2BQ. You of course will
need to "tune" the Q-multiplier for the rig. Each rig's slight circuits
variations require the Q-multiplier to be adjusted for that rig, after
which they work as advertised.
There are also "Q'x-er" (I think that was the name) which Drake made for
use with any 455Khz IF receiver (almost all were in those days) that works
great with the 2B. You can often find those at Hamfest very
inexpensively. That is what I finally had with my 2B when I sold it.
I like the 2B, but at some point there is just not enough room and time.
It went to a good shack.
73,
Ron
============================================================
Amateur Radio Station: WD8SBB - Ron and KB8NRP - Joann
============================================================
On Sun, 24 Jul 2005, DW Holtman wrote:
Hello,
I have a quick question. Will a Drake 2-CQ from a 2-C work with a 2-B receiver?
Thank you in advance for your help.
73's
DW Holtman
WB7SSN
----------------------------------------------------------------------
On Behalf of Ron Wagner <[EMAIL PROTECTED]>
Submissions: [email protected]
Unsubscribe: [EMAIL PROTECTED] - unsubscribe drakelist in body
Hopelessly Lost: [EMAIL PROTECTED] - help in body of message
Zerobeat Web Page: http://www.zerobeat.net
Brought to you courtesy of TLCHost.net http://www.tlchost.net/
----------------------------------------------------------------------
