Dino Papas <[EMAIL PROTECTED]> made an utterance to the drakelist gang
----------------------------------------------------------------------
Or you may want to make up a couple of "sniffer loops" that are a
little more permanent....on a piece of RG-58 (or whatever small 50
ohm coax you have lying around) put a BNC connector on one end and
solder a a two turn loop of 22 Ga. solid insulated wire (diameter ~
1/2") at the other end to the center conductor and coax
shield....couple of pieces of shrink-wrap makes it a nice neat
installation. A single turn with ~ 1/4" diameter is good for VHF and
up. These things work great with my service monitor and spectrum
analyzer and eliminate the need for any direct connection if the
signals floating around the circuit are strong enough to be detected.
Dino KL0S/4
----------------------------------------------------------------------
Submissions: [email protected]
Unsubscribe: [EMAIL PROTECTED] - unsubscribe drakelist in body
Hopelessly Lost: [EMAIL PROTECTED] - help in body of message
Zerobeat Web Page: www.zerobeat.net - sponsored by www.tlchost.net
----------------------------------------------------------------------
