"R.van Trotsenburg" <[EMAIL PROTECTED]> made an utterance to the drakelist gang
----------------------------------------------------------------------
Hi Floyd,
I do seen this happen in at least three other occasions in PS7 supplies.
As long as the PS7 is not blowing it's fuses. It means that both crowbar
and current limiter circuits are doing there job. 
73, Rien PA0TRT  


Message text written by INTERNET:[email protected]
>Floyd Sense <[EMAIL PROTECTED]> made an utterance to the drakelist gang
----------------------------------------------------------------------
After posting the question, I ran a test to see what the time was that 
caused the problem.  If I turned on the TR7 in 5 seconds or less, it 
never turns on.  If I wait 8 seconds or more, it always turns on.  I've 
not noticed any other problems with the supply, so won't worry about it. 
    I don't recall ever seeing anyone else mention it here, and thought 
that someone would have by now if all the PS7s acted that way.

73, K8AC


[EMAIL PROTECTED] wrote:
> Floyd -
> 
> By turning the TR7 off and on rapidly, you trigger a "crowbar" which 
> will not allow you to turn the rig on until it (The PS) has time to
reset.
> 
> 15 seconds to reset seem a bit over exaggerated, but it is possible that 
> there may be a problem in the protective circuit.
> 
> 73,
> Jay/AF2C
> 
> 
> 
> At 03:14 PM 3/16/2007 -0400, you wrote:
> 
> 
>> Floyd Sense <[EMAIL PROTECTED]> made an utterance to the drakelist 
>> gang
>> ----------------------------------------------------------------------
>> I have a small problem when using my PS-7 supply with my TR7.  Haven't 
>> taken it to the workbench yet and thought I'd get other opinions 
>> first.  When I first turn on the TR7, the power always comes on 
>> immediately. If  later I turn it off and then back on within a couple 
>> of seconds, there's no DC power to the TR-7.  If I wait for maybe 15 
>> seconds and try again, it will always power on.
>>
>> At first I thought that maybe the switch in the TR7 was acting up, but 
>> I can't duplicate the problem when using a different DC supply.  Of 
>> course,I suppose it could be the AC switch contacts, but the peculiar 
>> behavior makes me lean towards a problem in the PS7.  Any opinions?
>>
>> 73, Floyd - K8AC
----------------------------------------------------------------------
Submissions:        [email protected]
Unsubscribe:        [EMAIL PROTECTED] - unsubscribe drakelist in
body
Hopelessly Lost:    [EMAIL PROTECTED] - help in body of message
Zerobeat Web Page:  www.zerobeat.net - sponsored by www.tlchost.net
----------------------------------------------------------------------

<

----------------------------------------------------------------------
Submissions:        [email protected]
Unsubscribe:        [EMAIL PROTECTED] - unsubscribe drakelist in body
Hopelessly Lost:    [EMAIL PROTECTED] - help in body of message
Zerobeat Web Page:  www.zerobeat.net - sponsored by www.tlchost.net
----------------------------------------------------------------------

Reply via email to