Garey Barrell <[EMAIL PROTECTED]> made an utterance to the drakelist gang
----------------------------------------------------------------------
Ted -
1. Check the bias supply. A failure in the bias supply can severely
damage the transmitter & power supply, even if the transmitter is in
standby.
If bias voltage is ok, (verify Final stage idle current is, or can be
set to, 0.1A).
2. Try another 6EV7.
3. Bridge C129 with a good electrolytic.
If still a problem, report back!
73, Garey - K4OAH
Atlanta
Drake 2-B, 4-B & C-Line Service Supplement CDs
<www.k4oah.com>
Ted Wright wrote:
Ted Wright <[EMAIL PROTECTED]> made an utterance to the drakelist gang
----------------------------------------------------------------------
Hi Guys
My twins have developed a problem . The transmitter rite after warm up
goes into transmit and will not come out unless I turn it off . Is
this a common problem ?? It is new to me as my drakes are the pride of
my fleet over here and this is very frustrating to me not knowing what
or how to fix such a dilemma!!
Does any one have any suggestions??
tnx Ted
n3zrx
----------------------------------------------------------------------
Submissions: [email protected]
Unsubscribe: [EMAIL PROTECTED] - unsubscribe drakelist in body
Hopelessly Lost: [EMAIL PROTECTED] - help in body of message
Zerobeat Web Page: www.zerobeat.net - sponsored by www.tlchost.net
----------------------------------------------------------------------
