"Hunter Ellington" <[EMAIL PROTECTED]> made an utterance to the drakelist gang ---------------------------------------------------------------------- Where does one get the #12 bulb?
R. Hunter Ellington, Esq. Shareholder Gorrell Giles PC 1331 Seventeenth Street, Suite 1000 Denver, Colorado 80202 (303) 996-6585 Direct (303) 996-2680 Fax [EMAIL PROTECTED] -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Garey Barrell Sent: Tuesday, December 11, 2007 8:28 PM To: [EMAIL PROTECTED] Subject: Re: [drakelist] New TR-3 owner Garey Barrell <[EMAIL PROTECTED]> made an utterance to the drakelist gang ---------------------------------------------------------------------- Mark - Check for the #12 bulb inside the PA compartment, on top of the T-R relay. Make sure it's there, and not open. Also check the relay itself for dirty contacts. 73, Garey - K4OAH Glen Allen, VA Drake 2-B, 4-B & C-Line Service Supplement CDs <www.k4oah.com> Mark Pilant wrote: > > Mark Pilant <[EMAIL PROTECTED]> made an utterance to the > drakelist gang > ---------------------------------------------------------------------- > After spending a while deciding, I am now the proud new owner of a > TR-3/RV-3/AC-3 set. (Also a a W-7 meter, but I'll probably see if I > can trade it for a more appropriate W-4 at some point.) > > In any event, there was some minor shipping damage but nothing major; > just some bent cabinet sheet metal. But the real issue is the set > seems to be pretty deaf. I haven't even tried to transmit into a > dummy load yet. (I have a Palstar DL2K so I should be all set in that > area.) > > If I hook it up to me HP-8640B and set the TR-3 to receive SSB, I can > find the signal on all bands, but the (AM) modulated signal is really > down in the mud. If I switch the set to AM, I am unable to find the > signal at all. > > I also tried to see if I could pick up a 40m signal which was booming > in on my Icom-725 + Cushcraft R7. Using the same antenna I couldn't > hear anything. > > So I expect there is also some electrical damage; probably one or more > tubes. My next task is to test all the tubes on my TV-2/C tester. > From there, I'll do all the voltage and resistance checks. > > I was wondering if you kind folks might have some other suggestions? > > 73 > > - Mark N1VQW > ---------------------------------------------------------------------- Submissions: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] - unsubscribe drakelist in body Hopelessly Lost: [EMAIL PROTECTED] - help in body of message Zerobeat Web Page: www.zerobeat.net - sponsored by www.tlchost.net ---------------------------------------------------------------------- ---------------------------------------------------------------------- Submissions: [EMAIL PROTECTED] Unsubscribe: [EMAIL PROTECTED] - unsubscribe drakelist in body Hopelessly Lost: [EMAIL PROTECTED] - help in body of message Zerobeat Web Page: www.zerobeat.net - sponsored by www.tlchost.net ----------------------------------------------------------------------
