Garey Barrell <[EMAIL PROTECTED]> made an utterance to the drakelist gang
----------------------------------------------------------------------
Dave -
Check the bias supply in the AC-4. Probably bad electrolytic caps
and/or diode.
73, Garey - K4OAH
Glen Allen, VA
Drake 2-B, 4-B & C-Line Service Supplement CDs
<www.k4oah.com>
David Abbott wrote:
Good evening,
I have had a problem with my t4xc and it has been getting
worse. My transmitter in the standby mode will energize the
relay as though you were going into the transmit mode. I
cleaned the contacts on the relay and even tried a new relay.
The transmitter would stay in the standby mode until it
warmed up and then would go into transmit. My question is has
anybody had this problem and I am wondering if it is a cap or
diode in the circuit? Tnx for your help and 73's Dave WB6BIL
----------------------------------------------------------------------
Submissions: [EMAIL PROTECTED]
Unsubscribe: [EMAIL PROTECTED] - unsubscribe drakelist in body
Hopelessly Lost: [EMAIL PROTECTED] - help in body of message
Zerobeat Web Page: www.zerobeat.net - sponsored by www.tlchost.net
----------------------------------------------------------------------
