Hi Don, I have a new on-off switch but missing the mount wafer I.e. The previous owner removed the switch and mount altogether. I think my function switch is fine otherwise so if you remove yours, I think it would cure my problem. I want to run the R4B with a 2NT soon-hi! Thanks and 73 Lew K1NDV -------Original Message------- From: Don Cunningham Date: 03/30/08 11:40:48 To: [EMAIL PROTECTED] Subject: Re: [drakelist] Need R4B ON-Off switch Lew, If you don't find what you need from a "donor rig", get in touch with me direct in a week or so. I am replacing the function switch mechanism in my R4C, and will have the parts you need, I think, left over. All that will be missing from this one is the "detent spring" or whatever makes the detent between positions on the switch. If your function switch "clicks" between positions, you should be able to make an operating unit out of this part and yours. Of course a "donor" switch is easier, so try that first, hi. 73, Don, WB5HAK ----- Original Message ----- From: Lew (K1NDV) To: [EMAIL PROTECTED] Sent: Sunday, March 30, 2008 9:49 AM Subject: [drakelist] Need R4B ON-Off switch
Trying to finish up my R4B. Previous owner removed the on-off switch BUT took the mounting wafer off as well. Anyone have one out of a junker? Have Pay Pal or cash. Thanks-Lew K1NDV No virus found in this incoming message. Checked by AVG. Version: 7.5.519 / Virus Database: 269.22.1/1349 - Release Date: 3/29/2008 5:02 PM
