Thanks Gaey and everyone who replied. I put the speaker on the bed lined up the holes and finally got the screws in! It took me about an hour to get the power suppy screwed in. Now today I hope to put the twins on the air! 73 Bill K9BuB
--- On Sat, 8/2/08, Gary Poland <[EMAIL PROTECTED]> wrote: From: Gary Poland <[EMAIL PROTECTED]> Subject: Re: [Drakelist] Drake MS-4 and AC-4 To: [EMAIL PROTECTED] Date: Saturday, August 2, 2008, 6:26 AM Bill, There are probably 50 ways to do this, and you'll get 100 responses. You can sit the MS-4 on it's side, slide the AC-4 in resting on a piece cardboard that elevates the AC-4 up to catch the screws.....or, with the AC-4 sitting on its feet normally, slide the AC-4 in, raise up the back of MS-4 just enough to get the back screws in, then raise it more to get the front screws in. Easier accomplished than explained here, HI HI. The speaker cord comes out the side I believe. I dont mount my AC-4's inside the MS-4, I keep them out in the open under my operating table. 73, Gary W8PU http://home.cinci.rr.com/w8pu
_______________________________________________ Drakelist mailing list [email protected] http://mailman.zerobeat.net/mailman/listinfo/drakelist
