Ed,
One thing I notice, is that the builder has the PS stack tight against one
another. There's a fair amount of potential difference between all those
electrolytic cans, and the sleeving that covers the outer can is NOT
typically rated for any serious withstand voltage by most
manufacturers. I've had reason to question this in several situations at
work and in each case, when I tried to pin the manufacturers as to the
breakdown voltage of that PVC sleeving, the answer ultimately was "it's
there to provide a marking surface, not guaranteed as an insulator).
Just my .02
John K5MO
At 07:33 PM 01/15/2009, Ed wrote:
Just wanted to share this article I found on swapping out the power
supply,how to handle biasing etc.
<http://www.k0gkd.com/l4b.html>http://www.k0gkd.com/l4b.html
73,
W8KQV-Ed
_______________________________________________
Drakelist mailing list
[email protected]
http://mailman.zerobeat.net/mailman/listinfo/drakelist
_______________________________________________
Drakelist mailing list
[email protected]
http://mailman.zerobeat.net/mailman/listinfo/drakelist
