Luke -
Sounds like the crystal BAND oscillator is not running.
Start by swapping out V1. If no luck, that circuit is most likely where
your problem lies. Try "exercising" the BAND switch, DeoxiT on the
associated switch wafers.
73, Garey - K4OAH
Glen Allen, VA
Drake 2-B, 4-B, C-Line& TR-4/C Service Supplement CDs
<www.k4oah.com>
Luther Nallie wrote:
I just acquired a TR4C/w and everything works great except the only
bands that work are 80m and 20m. I don't get anything on the other
bands and was wondering if somebody could give me a starting point to
try to find my problem. I know how to use a VOM and soldering iron
and have worked on guitar amplifiers, etc. but not real sharp about
radio gear. I can read a schematic. Thanks for any advice.
Luke
_______________________________________________
Drakelist mailing list
[email protected]
http://mailman.zerobeat.net/mailman/listinfo/drakelist
